I bet the old ifconfig mtu commands will work, even if dladm won't modify the interface.
On Wed, Jan 22, 2014 at 11:09 AM, David Seira <[email protected]> wrote: > Hi all, > > I'm trying to figure out how change the mtu of a vlan interface once > it is created. > > First I've created the aggr interface with the mtu 1500. Then I've > created a vlan for this interface with the same mtu. > > Next I want to change the mtu of this connection. First I've changed > the mtu of the aggr: > > #dladm set-linkprop -p mtu=9000 aggr0 > > But the problem comes when I've tried to change the mtu of the vlan > interface with the same command; I receive the next message: > > dladm: warning: cannot set link property 'mtu' on 'aggr0.164': > operation not supported > > I've also tried disable the interface but with the same result. > > If I delete and create the vlan interface again (with the aggr0 with > the mtu 9000) it works. > > I don't understand why is not possible to change the mtu of a vlan > interface once it is created. > > Is possible? How can I do that? > > > Regards, > David > _______________________________________________ > OmniOS-discuss mailing list > [email protected] > http://lists.omniti.com/mailman/listinfo/omnios-discuss _______________________________________________ OmniOS-discuss mailing list [email protected] http://lists.omniti.com/mailman/listinfo/omnios-discuss
