Hello,
If I don´t disable acpi, my HP nc6400 Laptop (Centrino Duo, no apm) freezes
when loading bsd.mp and reboots when loading bsd.mp. (i386 4.3 Release)
And I suppose I need a working acpi to enable smp.
Is it possible to do something in UKC to get acpi to function
Thanks in advance
Jesper
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz ("GenuineIntel" 686-class) 1.83 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 2138468352 (2039MB)
avail mem = 2059755520 (1964MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/05/07, BIOS32 rev. 0 @ 0xf0000, SMBIOS
rev. 2.4 @ 0xf398f (23 entries)
bios0: vendor Hewlett-Packard version "68YCU Ver. F.0B" date 09/05/2007
bios0: Hewlett-Packard HP Compaq nc6400 (RM100ET#ABY)
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf07c0/192 (10 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xff880/192 (10 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
pcibios0: PCI bus #32 is the last bus
bios0: ROM list: 0xc0000/0x10000!
cpu0 at mainbus0
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130b2506000b25
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1833 MHz (1292 mV): speeds: 1833, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
agp0 at pchb0: aperture at 0xe0000000, size 0x10000000
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 10
azalia0: codec[s]: Analog Devices/0x1981, AT&T/Lucent/0x3026, using Analog
Devices/0x1981
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: irq 10
pci1 at ppb0 bus 8
bge0 at pci1 dev 0 function 0 "Broadcom BCM5753M" rev 0x21, BCM5750 C1
(0x4201): irq 10, address 00:16:d4:f2:9b:0d
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: irq 10
pci2 at ppb1 bus 16
wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: irq 10,
MoW2, address 00:1b:77:31:8d:bb
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: irq 5
pci3 at ppb2 bus 32
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 5
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 2
cbb0 at pci4 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: irq 11
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci4 dev 6 function 2 not
configured
sdhc0 at pci4 dev 6 function 3 "TI PCIXX12 Secure Data" rev 0x00: irq 11
sdmmc0 at sdhc0
"TI PCIXX12 Smart Card" rev 0x00 at pci4 dev 6 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA775 DVD/CDRW, 1.00> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: irq 10, AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST980811AS, 3.BH> SCSI3 0/direct fixed
sd0: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301488 sec total
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom2: irq 5 already in use
biomask ef7d netmask ef7d ttymask ffff
mtrr: Pentium Pro MTRR support
ugen0 at uhub2 port 1 "AuthenTec Fingerprint Sensor" rev 1.10/6.23 addr 2
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
ugen1 at uhub1 port 1 "Broadcom Corp HP Integrated Module" rev 2.00/1.00 addr 2
syncing disks... done
rebooting...
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz ("GenuineIntel" 686-class) 1.83 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 2138468352 (2039MB)
avail mem = 2059755520 (1964MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/05/07, BIOS32 rev. 0 @ 0xf0000, SMBIOS
rev. 2.4 @ 0xf398f (23 entries)
bios0: vendor Hewlett-Packard version "68YCU Ver. F.0B" date 09/05/2007
bios0: Hewlett-Packard HP Compaq nc6400 (RM100ET#ABY)
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf07c0/192 (10 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xff880/192 (10 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
pcibios0: PCI bus #32 is the last bus
bios0: ROM list: 0xc0000/0x10000!
cpu0 at mainbus0
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130b2506000b25
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1833 MHz (1292 mV): speeds: 1833, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
agp0 at pchb0: aperture at 0xe0000000, size 0x10000000
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 10
azalia0: codec[s]: Analog Devices/0x1981, AT&T/Lucent/0x3026, using Analog
Devices/0x1981
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: irq 10
pci1 at ppb0 bus 8
bge0 at pci1 dev 0 function 0 "Broadcom BCM5753M" rev 0x21, BCM5750 C1
(0x4201): irq 10, address 00:16:d4:f2:9b:0d
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: irq 10
pci2 at ppb1 bus 16
wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: irq 10,
MoW2, address 00:1b:77:31:8d:bb
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: irq 5
pci3 at ppb2 bus 32
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 5
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 2
cbb0 at pci4 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: irq 11
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci4 dev 6 function 2 not
configured
sdhc0 at pci4 dev 6 function 3 "TI PCIXX12 Secure Data" rev 0x00: irq 11
sdmmc0 at sdhc0
"TI PCIXX12 Smart Card" rev 0x00 at pci4 dev 6 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA775 DVD/CDRW, 1.00> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: irq 10, AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST980811AS, 3.BH> SCSI3 0/direct fixed
sd0: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301488 sec total
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom2: irq 5 already in use
biomask ef7d netmask ef7d ttymask ffff
mtrr: Pentium Pro MTRR support
ugen0 at uhub2 port 1 "AuthenTec Fingerprint Sensor" rev 1.10/6.23 addr 2
ugen1 at uhub1 port 1 "Broadcom Corp HP Integrated Module" rev 2.00/1.00 addr 2
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
_______________________________________________
Openbsd-newbies mailing list
[email protected]
http://mailman.theapt.org/listinfo/openbsd-newbies
