You should try out a recent snapshot (or 4.4 when it is released). There
have been many changes to ACPI support during that time, which helped out
my HP laptop (nx6125) immensly.
On 2008 Sep 12 (Fri) at 22:38:43 +0200 (+0200), [EMAIL PROTECTED] wrote:
:Hello,
:
:If I don?t disable acpi, my HP nc6400 Laptop (Centrino Duo, no apm) freezes
when loading bsd.mp and reboots when loading bsd.mp. (i386 4.3 Release)
:
:And I suppose I need a working acpi to enable smp.
:
:Is it possible to do something in UKC to get acpi to function
:
:Thanks in advance
:
:Jesper
:
:
:
:
:OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
: [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
:cpu0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz ("GenuineIntel" 686-class) 1.83
GHz
:cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
:real mem = 2138468352 (2039MB)
:avail mem = 2059755520 (1964MB)
:mainbus0 at root
:bios0 at mainbus0: AT/286+ BIOS, date 09/05/07, BIOS32 rev. 0 @ 0xf0000,
SMBIOS rev. 2.4 @ 0xf398f (23 entries)
:bios0: vendor Hewlett-Packard version "68YCU Ver. F.0B" date 09/05/2007
:bios0: Hewlett-Packard HP Compaq nc6400 (RM100ET#ABY)
:acpi at bios0 function 0x0 not configured
:pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
:pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf07c0/192 (10 entries)
:pcibios0: bad IRQ table checksum
:pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xff880/192 (10 entries)
:pcibios0: PCI Exclusive IRQs: 5 10 11
:pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
:pcibios0: PCI bus #32 is the last bus
:bios0: ROM list: 0xc0000/0x10000!
:cpu0 at mainbus0
:cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130b2506000b25
:cpu0: using only highest and lowest power states
:cpu0: Enhanced SpeedStep 1833 MHz (1292 mV): speeds: 1833, 1000 MHz
:pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
:pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
:agp0 at pchb0: aperture at 0xe0000000, size 0x10000000
:vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
:wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
:wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
:"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
:azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 10
:azalia0: codec[s]: Analog Devices/0x1981, AT&T/Lucent/0x3026, using Analog
Devices/0x1981
:audio0 at azalia0
:ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: irq 10
:pci1 at ppb0 bus 8
:bge0 at pci1 dev 0 function 0 "Broadcom BCM5753M" rev 0x21, BCM5750 C1
(0x4201): irq 10, address 00:16:d4:f2:9b:0d
:brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
:ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: irq 10
:pci2 at ppb1 bus 16
:wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: irq 10,
MoW2, address 00:1b:77:31:8d:bb
:ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: irq 5
:pci3 at ppb2 bus 32
:uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 10
:uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 11
:uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 11
:uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 5
:ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 10
:usb0 at ehci0: USB revision 2.0
:uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
:ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
:pci4 at ppb3 bus 2
:cbb0 at pci4 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: irq 11
:"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci4 dev 6 function 2 not
configured
:sdhc0 at pci4 dev 6 function 3 "TI PCIXX12 Secure Data" rev 0x00: irq 11
:sdmmc0 at sdhc0
:"TI PCIXX12 Smart Card" rev 0x00 at pci4 dev 6 function 4 not configured
:cardslot0 at cbb0 slot 0 flags 0
:cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
:pcmcia0 at cardslot0
:ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled
:pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
:atapiscsi0 at pciide0 channel 0 drive 0
:scsibus0 at atapiscsi0: 2 targets
:cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA775 DVD/CDRW, 1.00> SCSI0 5/cdrom
removable
:cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
:pciide0: channel 1 ignored (disabled)
:ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: irq 10, AHCI
1.1
:scsibus1 at ahci0: 32 targets
:sd0 at scsibus1 targ 0 lun 0: <ATA, ST980811AS, 3.BH> SCSI3 0/direct fixed
:sd0: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301488 sec total
:usb1 at uhci0: USB revision 1.0
:uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
:usb2 at uhci1: USB revision 1.0
:uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
:usb3 at uhci2: USB revision 1.0
:uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
:usb4 at uhci3: USB revision 1.0
:uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
:isa0 at ichpcib0
:isadma0 at isa0
:pckbc0 at isa0 port 0x60/5
:pckbd0 at pckbc0 (kbd slot)
:pckbc0: using irq 1 for kbd slot
:wskbd0 at pckbd0: console keyboard, using wsdisplay0
:pmsi0 at pckbc0 (aux slot)
:pckbc0: using irq 12 for aux slot
:wsmouse0 at pmsi0 mux 0
:pcppi0 at isa0 port 0x61
:midi0 at pcppi0: <PC speaker>
:spkr0 at pcppi0
:lpt0 at isa0 port 0x378/4 irq 7
:npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
:pccom2: irq 5 already in use
:biomask ef7d netmask ef7d ttymask ffff
:mtrr: Pentium Pro MTRR support
:ugen0 at uhub2 port 1 "AuthenTec Fingerprint Sensor" rev 1.10/6.23 addr 2
:softraid0 at root
:root on sd0a swap on sd0b dump on sd0b
:ugen1 at uhub1 port 1 "Broadcom Corp HP Integrated Module" rev 2.00/1.00 addr 2
:syncing disks... done
:rebooting...
:OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
: [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
:cpu0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz ("GenuineIntel" 686-class) 1.83
GHz
:cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
:real mem = 2138468352 (2039MB)
:avail mem = 2059755520 (1964MB)
:mainbus0 at root
:bios0 at mainbus0: AT/286+ BIOS, date 09/05/07, BIOS32 rev. 0 @ 0xf0000,
SMBIOS rev. 2.4 @ 0xf398f (23 entries)
:bios0: vendor Hewlett-Packard version "68YCU Ver. F.0B" date 09/05/2007
:bios0: Hewlett-Packard HP Compaq nc6400 (RM100ET#ABY)
:acpi at bios0 function 0x0 not configured
:pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
:pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf07c0/192 (10 entries)
:pcibios0: bad IRQ table checksum
:pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xff880/192 (10 entries)
:pcibios0: PCI Exclusive IRQs: 5 10 11
:pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
:pcibios0: PCI bus #32 is the last bus
:bios0: ROM list: 0xc0000/0x10000!
:cpu0 at mainbus0
:cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130b2506000b25
:cpu0: using only highest and lowest power states
:cpu0: Enhanced SpeedStep 1833 MHz (1292 mV): speeds: 1833, 1000 MHz
:pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
:pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
:agp0 at pchb0: aperture at 0xe0000000, size 0x10000000
:vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
:wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
:wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
:"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
:azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 10
:azalia0: codec[s]: Analog Devices/0x1981, AT&T/Lucent/0x3026, using Analog
Devices/0x1981
:audio0 at azalia0
:ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: irq 10
:pci1 at ppb0 bus 8
:bge0 at pci1 dev 0 function 0 "Broadcom BCM5753M" rev 0x21, BCM5750 C1
(0x4201): irq 10, address 00:16:d4:f2:9b:0d
:brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
:ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: irq 10
:pci2 at ppb1 bus 16
:wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: irq 10,
MoW2, address 00:1b:77:31:8d:bb
:ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: irq 5
:pci3 at ppb2 bus 32
:uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 10
:uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 11
:uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 11
:uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 5
:ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 10
:usb0 at ehci0: USB revision 2.0
:uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
:ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
:pci4 at ppb3 bus 2
:cbb0 at pci4 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: irq 11
:"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci4 dev 6 function 2 not
configured
:sdhc0 at pci4 dev 6 function 3 "TI PCIXX12 Secure Data" rev 0x00: irq 11
:sdmmc0 at sdhc0
:"TI PCIXX12 Smart Card" rev 0x00 at pci4 dev 6 function 4 not configured
:cardslot0 at cbb0 slot 0 flags 0
:cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
:pcmcia0 at cardslot0
:ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled
:pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
:atapiscsi0 at pciide0 channel 0 drive 0
:scsibus0 at atapiscsi0: 2 targets
:cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA775 DVD/CDRW, 1.00> SCSI0 5/cdrom
removable
:cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
:pciide0: channel 1 ignored (disabled)
:ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: irq 10, AHCI
1.1
:scsibus1 at ahci0: 32 targets
:sd0 at scsibus1 targ 0 lun 0: <ATA, ST980811AS, 3.BH> SCSI3 0/direct fixed
:sd0: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301488 sec total
:usb1 at uhci0: USB revision 1.0
:uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
:usb2 at uhci1: USB revision 1.0
:uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
:usb3 at uhci2: USB revision 1.0
:uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
:usb4 at uhci3: USB revision 1.0
:uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
:isa0 at ichpcib0
:isadma0 at isa0
:pckbc0 at isa0 port 0x60/5
:pckbd0 at pckbc0 (kbd slot)
:pckbc0: using irq 1 for kbd slot
:wskbd0 at pckbd0: console keyboard, using wsdisplay0
:pmsi0 at pckbc0 (aux slot)
:pckbc0: using irq 12 for aux slot
:wsmouse0 at pmsi0 mux 0
:pcppi0 at isa0 port 0x61
:midi0 at pcppi0: <PC speaker>
:spkr0 at pcppi0
:lpt0 at isa0 port 0x378/4 irq 7
:npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
:pccom2: irq 5 already in use
:biomask ef7d netmask ef7d ttymask ffff
:mtrr: Pentium Pro MTRR support
:ugen0 at uhub2 port 1 "AuthenTec Fingerprint Sensor" rev 1.10/6.23 addr 2
:ugen1 at uhub1 port 1 "Broadcom Corp HP Integrated Module" rev 2.00/1.00 addr 2
:softraid0 at root
:root on sd0a swap on sd0b dump on sd0b
:_______________________________________________
:Openbsd-newbies mailing list
:[email protected]
:http://mailman.theapt.org/listinfo/openbsd-newbies
:
--
Don't look back, the lemmings are gaining on you.
_______________________________________________
Openbsd-newbies mailing list
[email protected]
http://mailman.theapt.org/listinfo/openbsd-newbies
