On Fri, Sep 23, 2022 at 4:21 PM Bruce Ashfield <bruce.ashfi...@gmail.com> wrote: > > On Fri, Sep 23, 2022 at 5:31 PM Steve Sakoman <st...@sakoman.com> wrote: > > > > Hi Bruce, > > > > I cherry-picked this 5.15.x series into kirkstone and I'm getting a > > warning with the poky-tiny build. Any suggestions? > > > > (you can view the patch set in: > > https://git.openembedded.org/openembedded-core-contrib/log/?h=stable/kirkstone-nut) > > > > I fixed this in 5.19, but I forgot that I had merged the same ACPI > configuration change to 5.15. > > I've just sent a patch that cherry-picks the 5.19 fix to 5.15 and that > should resolve the warnings.
Thanks Bruce! Steve > > WARNING: linux-yocto-tiny-5.15.68+gitAUTOINC+81c5990606_35d0c78ae3-r0 > > do_kernel_configcheck: [kernel config]: specified values did not make > > it into the kernel's final configuration: > > [NOTE]: 'CONFIG_ATA_ACPI' last val (y) and .config val (n) do not match > > [INFO]: CONFIG_ATA_ACPI : n > > [INFO]: raw config text: > > config ATA_ACPI > > bool "ATA ACPI Support" > > default y > > select PATA_TIMINGS > > depends on ACPI && ATA > > help > > This option adds support for ATA-related ACPI objects. > > These ACPI objects add the ability to retrieve taskfiles > > from the ACPI BIOS and write them to the disk controller. > > These objects may be related to performance, security, > > power management, or other areas. > > You can disable this at kernel boot time by using the > > option libata.noacpi=1 > > Config 'ATA_ACPI' has the following Direct dependencies (ATA_ACPI=n): > > ACPI(=n) && ATA(=y) > > Parent dependencies are: > > ACPI [n] ATA [y] > > [INFO]: config 'CONFIG_ATA_ACPI' was set, but it wasn't assignable, > > check (parent) dependencies > > [NOTE]: 'CONFIG_SERIAL_8250_PNP' last val (y) and .config val (n) do not > > match > > [INFO]: CONFIG_SERIAL_8250_PNP : n > > [INFO]: raw config text: > > config SERIAL_8250_PNP > > bool "8250/16550 PNP device support" if EXPERT > > default y > > depends on SERIAL_8250 && PNP && HAS_IOMEM && TTY > > help > > This builds standard PNP serial support. You may be able to > > disable this feature if you only need legacy serial support. > > Config 'SERIAL_8250_PNP' has the following Direct dependencies > > (SERIAL_8250_PNP=n): > > SERIAL_8250(=y) && PNP(=n) && HAS_IOMEM(=y) && TTY(=y) > > Parent dependencies are: > > HAS_IOMEM [y] EXPERT [y] TTY [y] PNP [n] SERIAL_8250 [y] > > [INFO]: config 'CONFIG_SERIAL_8250_PNP' was set, but it wasn't > > assignable, check (parent) dependencies > > [NOTE]: 'CONFIG_EFI' last val (y) and .config val (n) do not match > > [INFO]: CONFIG_EFI : n > > [INFO]: raw config text: > > config EFI > > bool "EFI runtime service support" > > select UCS2_STRING > > select EFI_RUNTIME_WRAPPERS > > select ARCH_USE_MEMREMAP_PROT > > depends on ACPI > > help > > This enables the kernel to use EFI runtime services that are > > available (such as the EFI variable services). > > This option is only useful on systems that have EFI firmware. > > In addition, you should use the latest ELILO loader available > > at <http://elilo.sourceforge.net> in order to take advantage > > of EFI runtime services. However, even with this option, the > > resultant kernel should continue to boot on existing non-EFI > > platforms. > > Config 'EFI' has the following Direct dependencies (EFI=n): > > ACPI(=n) > > Parent dependencies are: > > ACPI [n] > > [INFO]: config 'CONFIG_EFI' was set, but it wasn't assignable, check > > (parent) dependencies > > [NOTE]: 'CONFIG_EFI_STUB' last val (y) and .config val (n) do not match > > [INFO]: CONFIG_EFI_STUB : n > > [INFO]: raw config text: > > config EFI_STUB > > bool "EFI stub support" > > select RELOCATABLE > > depends on EFI && !X86_USE_3DNOW && (y || X86_32) > > help > > This kernel feature allows a bzImage to be loaded directly > > by EFI firmware without the use of a bootloader. > > See Documentation/admin-guide/efi-stub.rst for more information. > > Config 'EFI_STUB' has the following Direct dependencies (EFI_STUB=n): > > EFI(=n) && !X86_USE_3DNOW(=n) (=y) && y || X86_32(=y) (=y) > > Parent dependencies are: > > EFI [n] X86_32 [y] X86_USE_3DNOW [n] > > [INFO]: config 'CONFIG_EFI_STUB' was set, but it wasn't assignable, > > check (parent) dependencies > > [NOTE]: 'CONFIG_EFIVAR_FS' last val (y) and .config val (n) do not match > > [INFO]: CONFIG_EFIVAR_FS : n > > [INFO]: raw config text: > > config EFIVAR_FS > > tristate "EFI Variable filesystem" > > default m > > depends on EFI > > help > > efivarfs is a replacement filesystem for the old EFI > > variable support via sysfs, as it doesn't suffer from the > > same 1024-byte variable size limit. > > To compile this file system support as a module, choose M > > here. The module will be called efivarfs. > > If unsure, say N. > > Config 'EFIVAR_FS' has the following Direct dependencies (EFIVAR_FS=n): > > EFI(=n) > > Parent dependencies are: > > EFI [n] > > [INFO]: config 'CONFIG_EFIVAR_FS' was set, but it wasn't assignable, > > check (parent) dependencies > > [NOTE]: 'CONFIG_FB_EFI' last val (y) and .config val (n) do not match > > [INFO]: CONFIG_FB_EFI : n > > [INFO]: raw config text: > > config FB_EFI > > bool "EFI-based Framebuffer Support" > > select DRM_PANEL_ORIENTATION_QUIRKS > > select FB_CFB_FILLRECT > > select FB_CFB_COPYAREA > > select FB_CFB_IMAGEBLIT > > depends on FB = y && !IA64 && EFI && HAS_IOMEM > > help > > This is the EFI frame buffer device driver. If the firmware on > > your platform is EFI 1.10 or UEFI 2.0, select Y to add support for > > using the EFI framebuffer as your console. > > Config 'FB_EFI' has the following Direct dependencies (FB_EFI=n): > > FB(=y) = y (=y) && !IA64(undefined/n) (=y) && EFI(=n) && HAS_IOMEM(=y) > > Parent dependencies are: > > HAS_IOMEM [y] EFI [n] FB [y] IA64 [IA64] > > [INFO]: config 'CONFIG_FB_EFI' was set, but it wasn't assignable, > > check (parent) dependencies > > [NOTE]: 'CONFIG_EFI_VARS' last val (m) and .config val (n) do not match > > [INFO]: CONFIG_EFI_VARS : n > > [INFO]: raw config text: > > config EFI_VARS > > tristate "EFI Variable Support via sysfs" > > default n > > depends on EFI && (X86 || IA64) && EFI > > help > > If you say Y here, you are able to get EFI (Extensible Firmware > > Interface) variable information via sysfs. You may read, > > write, create, and destroy EFI variables through this interface. > > Note that this driver is only retained for compatibility with > > legacy users: new users should use the efivarfs filesystem > > instead. > > Config 'EFI_VARS' has the following Direct dependencies (EFI_VARS=n): > > EFI(=n) && X86(=y) || IA64(undefined/n) (=y) > > Parent dependencies are: > > IA64 [IA64] EFI [n] X86 [y] > > [INFO]: config 'CONFIG_EFI_VARS' was set, but it wasn't assignable, > > check (parent) dependencies > > [NOTE]: 'CONFIG_HPET' last val (y) and .config val (n) do not match > > [INFO]: CONFIG_HPET : n > > [INFO]: raw config text: > > config HPET > > bool "HPET - High Precision Event Timer" if X86 || IA64 > > default n > > depends on ACPI > > help > > If you say Y here, you will have a miscdevice named "/dev/hpet/". Each > > open selects one of the timers supported by the HPET. The timers are > > non-periodic and/or periodic. > > Config 'HPET' has the following Direct dependencies (HPET=n): > > ACPI(=n) > > Parent dependencies are: > > IA64 [IA64] X86 [y] ACPI [n] > > [INFO]: config 'CONFIG_HPET' was set, but it wasn't assignable, check > > (parent) dependencies > > [NOTE]: 'CONFIG_HPET_MMAP' last val (y) and .config val (n) do not match > > [INFO]: CONFIG_HPET_MMAP : n > > [INFO]: raw config text: > > config HPET_MMAP > > bool "Allow mmap of HPET" > > default y > > depends on HPET > > help > > If you say Y here, user applications will be able to mmap > > the HPET registers. > > Config 'HPET_MMAP' has the following Direct dependencies (HPET_MMAP=n): > > HPET(=n) > > Parent dependencies are: > > HPET [n] > > [INFO]: config 'CONFIG_HPET_MMAP' was set, but it wasn't assignable, > > check (parent) dependencies > > [NOTE]: 'CONFIG_X86_AMD_PLATFORM_DEVICE' last val (y) and .config val > > (n) do not match > > [INFO]: CONFIG_X86_AMD_PLATFORM_DEVICE : n > > [INFO]: raw config text: > > config X86_AMD_PLATFORM_DEVICE > > bool "AMD ACPI2Platform devices support" > > select COMMON_CLK > > select PINCTRL > > depends on ACPI > > help > > Select to interpret AMD specific ACPI device to platform device > > such as I2C, UART, GPIO found on AMD Carrizo and later chipsets. > > I2C and UART depend on COMMON_CLK to set clock. GPIO driver is > > implemented under PINCTRL subsystem. > > Config 'X86_AMD_PLATFORM_DEVICE' has the following Direct dependencies > > (X86_AMD_PLATFORM_DEVICE=n): > > ACPI(=n) > > Parent dependencies are: > > ACPI [n] > > [INFO]: config 'CONFIG_X86_AMD_PLATFORM_DEVICE' was set, but it wasn't > > assignable, check (parent) dependencies > > [NOTE]: 'CONFIG_MMC_SDHCI_ACPI' last val (y) and .config val (n) do not > > match > > [INFO]: CONFIG_MMC_SDHCI_ACPI : n > > [INFO]: raw config text: > > config MMC_SDHCI_ACPI > > tristate "SDHCI support for ACPI enumerated SDHCI controllers" > > select IOSF_MBI if X86 > > depends on MMC_SDHCI && ACPI && PCI && MMC > > help > > This selects support for ACPI enumerated SDHCI controllers, > > identified by ACPI Compatibility ID PNP0D40 or specific > > ACPI Hardware IDs. > > If you have a controller with this interface, say Y or M here. > > If unsure, say N. > > Config 'MMC_SDHCI_ACPI' has the following Direct dependencies > > (MMC_SDHCI_ACPI=n): > > MMC_SDHCI(=y) && ACPI(=n) && PCI(=y) && MMC(=y) > > Parent dependencies are: > > X86 [y] MMC_SDHCI [y] PCI [y] MMC [y] ACPI [n] > > [INFO]: config 'CONFIG_MMC_SDHCI_ACPI' was set, but it wasn't > > assignable, check (parent) dependencies > > NOTE: recipe linux-yocto-tiny-5.15.68+gitAUTOINC+81c5990606_35d0c78ae3-r0: > > task do_kernel_configcheck: Succeeded > > > > On Mon, Sep 19, 2022 at 4:28 AM Bruce Ashfield <bruce.ashfi...@gmail.com> > > wrote: > > > > > > From: Bruce Ashfield <bruce.ashfi...@gmail.com> > > > > > > Updating to the latest korg -stable release that comprises > > > the following commits: > > > > > > dd20085f2a88 Linux 5.15.68 > > > e04b25638aef ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency > > > 154e72a4b381 perf machine: Use path__join() to compose a path instead > > > of snprintf(dir, '/', filename) > > > 590b4f10e3a4 drm/bridge: display-connector: implement bus fmts > > > callbacks > > > e084c6ab37d2 arm64: errata: add detection for AMEVCNTR01 incrementing > > > incorrectly > > > 4740910867ea iommu/vt-d: Correctly calculate sagaw value of IOMMU > > > f9e792035a0b arm64/bti: Disable in kernel BTI when cross section > > > thunks are broken > > > a8a007c5b10f Revert "arm64: kasan: Revert "arm64: mte: reset the page > > > tag in page->flags"" > > > 7aa57d869e4a hwmon: (mr75203) enable polling for all VM channels > > > 5e0fddad7100 hwmon: (mr75203) fix multi-channel voltage reading > > > 948b7beb0073 hwmon: (mr75203) fix voltage equation for negative > > > source input > > > a02267ebb247 hwmon: (mr75203) update pvt->v_num and vm_num to the > > > actual number of used sensors > > > 000f3353231e hwmon: (mr75203) fix VM sensor allocation when > > > "intel,vm-map" not defined > > > 4b198c41d736 s390/boot: fix absolute zero lowcore corruption on boot > > > a557ae094207 iommu/amd: use full 64-bit value in > > > build_completion_wait() > > > 4f8d65884808 swiotlb: avoid potential left shift overflow > > > df82f5ce4f50 i40e: Fix ADQ rate limiting for PF > > > 39d9de5872b6 i40e: Refactor tc mqprio checks > > > 657d9d8ac3e6 kbuild: disable header exports for UML in a > > > straightforward way > > > 12202e0f74fd MIPS: loongson32: ls1c: Fix hang during startup > > > 166ae43f02fb ASoC: mchp-spdiftx: Fix clang > > > -Wbitfield-constant-conversion > > > 4643fbc79ded ASoC: mchp-spdiftx: remove references to mchp_i2s_caps > > > 30a455ac385e hwmon: (tps23861) fix byte order in resistance register > > > 159d35a87ec3 perf script: Fix Cannot print 'iregs' field for hybrid > > > systems > > > 4519d4e32f98 sch_sfb: Also store skb len before calling child enqueue > > > a600a9babad6 RDMA/irdma: Report RNR NAK generation in device caps > > > 3ca173b217f4 RDMA/irdma: Return correct WC error for bind operation > > > failure > > > c1872dfde6f7 RDMA/irdma: Report the correct max cqes from query device > > > a1d7c8647c18 nvmet: fix mar and mor off-by-one errors > > > a96b1d33ec71 tcp: fix early ETIMEDOUT after spurious non-SACK RTO > > > 8589bbfad2b4 nvme-tcp: fix regression that causes sporadic requests > > > to time out > > > 13c80a6c1124 nvme-tcp: fix UAF when detecting digest errors > > > 8ddd001cef5e erofs: fix pcluster use-after-free on UP platforms > > > 5fbe35c94abc RDMA/mlx5: Set local port to one when accessing counters > > > 819110054b14 IB/core: Fix a nested dead lock as part of ODP flow > > > 55195563ec29 ipv6: sr: fix out-of-bounds read when setting HMAC data. > > > 4c4eda136410 RDMA/siw: Pass a pointer to virt_to_page() > > > 595e3616f8e0 xen-netback: only remove 'hotplug-status' when the vif > > > is actually destroyed > > > c3efe896f13b iavf: Detach device during reset task > > > 2ed94383f3a2 i40e: Fix kernel crash during module removal > > > 3e245b0e2168 ice: use bitmap_free instead of devm_kfree > > > 8527c9a6bf8e tcp: TX zerocopy should not sense pfmemalloc status > > > cd5f1a69d0b6 net: introduce __skb_fill_page_desc_noacc > > > 7eb9bf4edd1c tipc: fix shift wrapping bug in map_get() > > > 1a889da60afc sch_sfb: Don't assume the skb is still around after > > > enqueueing to child > > > b0b35b455ece Revert "net: phy: meson-gxl: improve link-up behavior" > > > 2f6640b19edf afs: Use the operation issue time instead of the reply > > > time for callbacks > > > e28eb3519d5f rxrpc: Fix an insufficiently large sglist in > > > rxkad_verify_packet_2() > > > 24a4e79d92e0 rxrpc: Fix ICMP/ICMP6 error handling > > > 59f1c62d91ca ALSA: usb-audio: Register card again for iface over > > > delayed_register option > > > 4dc401ef8b23 ALSA: usb-audio: Inform the delayed registration more > > > properly > > > a8edd49c94b4 RDMA/srp: Set scmnd->result only when scmnd is not NULL > > > 451c9ce1e2fc netfilter: nf_conntrack_irc: Fix forged IP logic > > > 1ce55ec5cb7c netfilter: nf_tables: clean up hook list when offload > > > flags check fails > > > 92837ac04779 netfilter: br_netfilter: Drop dst references before > > > setting. > > > 940e58f2ccc0 ARM: dts: at91: sama5d2_icp: don't keep vdd_other > > > enabled all the time > > > 86706fa90be6 ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled > > > all the time > > > d6015c56f477 ARM: dts: at91: sama5d2_icp: specify proper regulator > > > output ranges > > > a8ab10c3f137 ARM: dts: at91: sama5d27_wlsom1: specify proper > > > regulator output ranges > > > 6fbff44cba17 ARM: at91: pm: fix DDR recalibration when resuming from > > > backup and self-refresh > > > e11d08c825f2 ARM: at91: pm: fix self-refresh for sama7g5 > > > 32dd0b22a5ba wifi: wilc1000: fix DMA on stack objects > > > 6f7aa1029f8e RDMA/hns: Fix wrong fixed value of qp->rq.wqe_shift > > > c1796dd54259 RDMA/hns: Fix supported page size > > > 43245c77d9ef soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak > > > bugs > > > d3eb252d7636 RDMA/cma: Fix arguments order in net device validation > > > e2ec1064a47d tee: fix compiler warning in tee_shm_register() > > > eb53e84dc1ac regulator: core: Clean up on enable failure > > > a53b30716c60 soc: imx: gpcv2: Assert reset before ungating clock > > > 83a7e5d2f14e ARM: dts: imx6qdl-kontron-samx6i: remove duplicated node > > > ae8e70e31763 RDMA/rtrs-srv: Pass the correct number of entries for > > > dma mapped SGL > > > ad69caa47861 RDMA/rtrs-clt: Use the right sg_cnt after ib_dma_map_sg > > > 237f16395304 ASoC: qcom: sm8250: add missing module owner > > > 3bf4bf54069f cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() > > > deadlock > > > 509e3456d363 cgroup: Elide write-locking threadgroup_rwsem when > > > updating csses on an empty subtree > > > 3b97deb4abf5 NFS: Fix another fsync() issue after a server reboot > > > 31b992b3c39b NFS: Save some space in the inode > > > 88d24e83a268 NFS: Further optimisations for 'ls -l' > > > 1dcc308898e7 scsi: lpfc: Add missing destroy_workqueue() in error path > > > 6229fa494a59 scsi: mpt3sas: Fix use-after-free warning > > > d2ca79dd0b54 drm/i915: Implement WaEdpLinkRateDataReload > > > ebf46da50beb nvmet: fix a use-after-free > > > 58acd2ebae03 drm/amd/display: fix memory leak when using > > > debugfs_lookup() > > > 26e9a1ded892 sched/debug: fix dentry leak in > > > update_sched_domain_debugfs > > > 94c84128adb1 debugfs: add debugfs_lookup_and_remove() > > > 8875d606761e kprobes: Prohibit probes in gate area > > > 5321908ef74f vfio/type1: Unpin zero pages > > > 7da1afa444a1 btrfs: zoned: set pseudo max append zone limit in zone > > > emulation mode > > > 75082adeb414 tracing: Fix to check event_mutex is held while > > > accessing trigger list > > > 98e8e67395cc ALSA: usb-audio: Fix an out-of-bounds bug in > > > __snd_usb_parse_audio_interface() > > > df5ec554e9e3 ALSA: usb-audio: Split endpoint setups for hw_params and > > > prepare > > > d1118465ae2e ALSA: aloop: Fix random zeros in capture data when using > > > jiffies timer > > > 45814a53514e ALSA: emu10k1: Fix out of bounds access in > > > snd_emu10k1_pcm_channel_alloc() > > > 8015ef9e8a0e ALSA: pcm: oss: Fix race at SNDCTL_DSP_SYNC > > > ad5ef763dbbe drm/amdgpu: mmVM_L2_CNTL3 register not initialized > > > correctly > > > fc5a2a9616f3 fbdev: chipsfb: Add missing pci_disable_device() in > > > chipsfb_pci_init() > > > c3abfd6ce2f3 fbdev: fbcon: Destroy mutex on freeing struct fb_info > > > a7dff6f41e16 md: Flush workqueue md_rdev_misc_wq in md_alloc() > > > 0b7058067eb8 net/core/skbuff: Check the return value of > > > skb_copy_bits() > > > bd1b769564eb cpufreq: check only freq_table in __resolve_freq() > > > e928cf258910 netfilter: conntrack: work around exceeded receive window > > > 29906311b351 arm64: cacheinfo: Fix incorrect assignment of signed > > > error value to unsigned fw_level > > > 27092358e9c6 parisc: Add runtime check to prevent PA2.0 kernels on > > > PA1.x machines > > > deb2c9c0770b parisc: ccio-dma: Handle kmalloc failure in > > > ccio_init_resources() > > > c63ff388e7d4 Revert "parisc: Show error if wrong 32/64-bit compiler > > > is being used" > > > c50189129374 scsi: ufs: core: Reduce the power mode change timeout > > > 5a7a5b2edac4 drm/radeon: add a force flush to delay work when radeon > > > 622a557b28b7 drm/amdgpu: Check num_gfx_rings for gfx v9_0 rb setup. > > > c15c2c2c0896 drm/amdgpu: Move psp_xgmi_terminate call from > > > amdgpu_xgmi_remove_device to psp_hw_fini > > > 1f574fbe9c2b drm/gem: Fix GEM handle release errors > > > bbfd857abbd2 scsi: megaraid_sas: Fix double kfree() > > > 8179f0e08578 scsi: qla2xxx: Disable ATIO interrupt coalesce for quad > > > port ISP27XX > > > 625c78e1ae35 Revert "mm: kmemleak: take a full lowmem check in > > > kmemleak_*_phys()" > > > 7c6333411acf fs: only do a memory barrier for the first > > > set_buffer_uptodate() > > > 44b402da7b24 wifi: iwlegacy: 4965: corrected fix for potential > > > off-by-one overflow in il4965_rs_fill_link_cmd() > > > dd291e070be0 efi: capsule-loader: Fix use-after-free in > > > efi_capsule_write > > > ee06f08139e7 efi: libstub: Disable struct randomization > > > 6427605fa781 net: wwan: iosm: remove pointless null check > > > e1ad7a011591 Linux 5.15.67 > > > 096e34b05a43 kbuild: fix up permissions on scripts/pahole-flags.sh > > > bcecd2ee19ef Linux 5.15.66 > > > e1779c25e48b USB: serial: ch341: fix disabled rx timer on older > > > devices > > > e0923b4f38df USB: serial: ch341: fix lost character on LCR updates > > > 55d328924347 usb: dwc3: disable USB core PHY management > > > 121c6e37da76 usb: dwc3: qcom: fix use-after-free on runtime-PM wakeup > > > 9d6a2d022010 usb: dwc3: fix PHY disable sequence > > > b775fbf532dc kbuild: Add skip_encoding_btf_enum64 option to pahole > > > 0baced0e0938 kbuild: Unify options for BTF generation for vmlinux and > > > modules > > > 309aea4b6b81 tty: n_gsm: add sanity check for gsm->receive in > > > gsm_receive_buf() > > > 1787ec7dcc37 drm/i915: Skip wm/ddb readout for disabled pipes > > > f9a0f49be767 drm/i915/glk: ECS Liva Q2 needs GLK HDMI port timing > > > quirk > > > 301be8985e87 ALSA: seq: Fix data-race at module auto-loading > > > 9b7a07fcc5d4 ALSA: seq: oss: Fix data-race for max_midi_devs access > > > b2c973b52f14 ALSA: hda/realtek: Add speaker AMP init for Samsung > > > laptops with ALC298 > > > c5652d5d71cf net: mac802154: Fix a condition in the receive path > > > 4b9f3743a822 net: Use u64_stats_fetch_begin_irq() for stats fetch. > > > 57f1407ca166 ip: fix triggering of 'icmp redirect' > > > 5d20c6f932f2 wifi: mac80211: Fix UAF in ieee80211_scan_rx() > > > 552ba102a689 wifi: mac80211: Don't finalize CSA in IBSS mode if state > > > is disconnected > > > 253ec5fb8405 driver core: Don't probe devices after bus_type.match() > > > probe deferral > > > 7da29a2cc514 usb: gadget: mass_storage: Fix cdrom data transfers on > > > MAC-OS > > > 299f4f420f23 usb: xhci-mtk: fix bandwidth release issue > > > 27102b39b6d0 usb: xhci-mtk: relax TT periodic bandwidth allocation > > > c548b99e1c37 USB: core: Prevent nested device-reset calls > > > 4e22a43ec717 s390: fix nospec table alignments > > > 047a4d0f7924 s390/hugetlb: fix prepare_hugepage_range() check for 2 > > > GB hugepages > > > efdfa236a085 usb-storage: Add ignore-residue quirk for NXP PN7462AU > > > 0f8b5d706dcd USB: cdc-acm: Add Icom PMR F3400 support (0c26:0020) > > > bf6e4243f80b usb: cdns3: fix incorrect handling TRB_SMM flag for ISOC > > > transfer > > > f1eb9e5d2f6e usb: cdns3: fix issue with rearming ISO OUT endpoint > > > 48917032c702 usb: dwc2: fix wrong order of phy_power_on and phy_init > > > ea72b22a05ea usb: typec: tcpm: Return ENOTSUPP for power supply prop > > > writes > > > 4be500c63911 usb: typec: intel_pmc_mux: Add new ACPI ID for Meteor > > > Lake IOM device > > > b201f6203197 usb: typec: altmodes/displayport: correct pin assignment > > > for UFP receptacles > > > 577f84a6f120 USB: serial: option: add support for Cinterion > > > MV32-WA/WB RmNet mode > > > 6415953963a9 USB: serial: option: add Quectel EM060K modem > > > 93c283a09959 USB: serial: option: add support for OPPO R11 diag port > > > 2bb1ad8c957d USB: serial: cp210x: add Decagon UCA device id > > > 3a6c5c5ab734 xhci: Add grace period after xHC start to prevent > > > premature runtime suspend. > > > 75913c562f5b media: mceusb: Use new usb_control_msg_*() routines > > > 2c948dd68b9e usb: dwc3: pci: Add support for Intel Raptor Lake > > > 23987d01de44 thunderbolt: Use the actual buffer in tb_async_error() > > > e31db376f6d1 xen-blkfront: Cache feature_persistent value before > > > advertisement > > > 895a90ad7b3e xen-blkfront: Advertise feature-persistent as user > > > requested > > > 3e8107d69fc3 xen-blkback: Advertise feature-persistent as user > > > requested > > > c235c4fc521f mm: pagewalk: Fix race between unmap and page walker > > > 763d77241d8f xen/grants: prevent integer overflow in > > > gnttab_dma_alloc_pages() > > > 03b1870fbc5e KVM: x86: Mask off unsupported and unknown bits of > > > IA32_ARCH_CAPABILITIES > > > 111a3586ed4a gpio: pca953x: Add mutex_lock for regcache sync in PM > > > 53196e037620 hwmon: (gpio-fan) Fix array out of bounds access > > > 7b8a284ffe7a clk: bcm: rpi: Add missing newline > > > ff0b144d4b0a clk: bcm: rpi: Prevent out-of-bounds access > > > e827a5f32a0d clk: bcm: rpi: Use correct order for the parameters of > > > devm_kcalloc() > > > 237b4ef4c088 clk: bcm: rpi: Fix error handling of > > > raspberrypi_fw_get_rate > > > 5ba6155d3b2f Input: rk805-pwrkey - fix module autoloading > > > 9766749a30f6 clk: core: Fix runtime PM sequence in > > > clk_core_unprepare() > > > c13b0be5ade0 Revert "clk: core: Honor CLK_OPS_PARENT_ENABLE for clk > > > gate ops" > > > 519cd9c4b56e clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops > > > 0522550aeed4 drm/i915/reg: Fix spelling mistake "Unsupport" -> > > > "Unsupported" > > > fec48eba4783 KVM: VMX: Heed the 'msr' argument in > > > msr_write_intercepted() > > > 9e3c9efa7caf cifs: fix small mempool leak in SMB2_negotiate() > > > 81203ab7a6ef binder: fix alloc->vma_vm_mm null-ptr dereference > > > c2a4b5dc8fa7 binder: fix UAF of ref->proc caused by race condition > > > da3c6d0708e6 mmc: core: Fix inconsistent sd3_bus_mode at UHS-I SD > > > voltage switch failure > > > 8bca22970e1c mmc: core: Fix UHS-I SD 1.8V workaround branch > > > fc9b5b3f2ccc USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id > > > cf20c3533efc misc: fastrpc: fix memory corruption on open > > > 0e33b0f322fe misc: fastrpc: fix memory corruption on probe > > > 95ac9601feb5 iio: adc: mcp3911: use correct formula for AD conversion > > > 6e933a26e6a2 iio: ad7292: Prevent regulator double disable > > > df1b53bc799d Input: iforce - wake up after clearing > > > IFORCE_XMIT_RUNNING flag > > > 9f185ca8e019 tty: serial: lpuart: disable flow control while waiting > > > for the transmit engine to complete > > > 532b255af195 musb: fix USB_MUSB_TUSB6010 dependency > > > 2535431ae967 vt: Clear selection before changing the font > > > a19846f0f45b powerpc: align syscall table for ppc32 > > > f12afb4b5db0 staging: r8188eu: add firmware dependency > > > dc02aaf95001 staging: rtl8712: fix use after free bugs > > > 01fd7e12f8fb serial: fsl_lpuart: RS485 RTS polariy is inverse > > > 839ca7969fcf soundwire: qcom: fix device status array range > > > fdc69b070071 net/smc: Remove redundant refcount increase > > > 6ce0d73b2fbd Revert "sch_cake: Return __NET_XMIT_STOLEN when > > > consuming enqueued skb" > > > aca9d0acda9e tcp: annotate data-race around challenge_timestamp > > > 1c472d671d9c sch_cake: Return __NET_XMIT_STOLEN when consuming > > > enqueued skb > > > 55fb8c3baa80 kcm: fix strp_init() order and cleanup > > > 660df4411ef4 mlxbf_gige: compute MDIO period based on i1clk > > > a4c08cbfbcf9 ethernet: rocker: fix sleep in atomic context bug in > > > neigh_timer_handler > > > a420d5872601 net/sched: fix netdevice reference leaks in > > > attach_default_qdiscs() > > > ce881ddbdc02 net: sched: tbf: don't call qdisc_put() while holding > > > tree lock > > > d6ec2f711c94 net: dsa: xrs700x: Use irqsave variant for u64 stats > > > update > > > ca54b2bfaab3 openvswitch: fix memory leak at failed datapath creation > > > 8eeba7ef4d1d net: smsc911x: Stop and start PHY during suspend and > > > resume > > > cc2b9170aa34 net: sparx5: fix handling uneven length packets in > > > manual extraction > > > 5359524251d2 Revert "xhci: turn off port power in shutdown" > > > ee19bbed4b03 wifi: cfg80211: debugfs: fix return type in > > > ht40allow_map_read() > > > 20b2d5be85e9 ALSA: hda: intel-nhlt: Correct the handling of > > > fmt_config flexible array > > > 59a711467e8d ALSA: hda: intel-nhlt: remove use of __func__ in dev_dbg > > > 7828b5d0080a drm/i915/display: avoid warnings when registering dual > > > panel backlight > > > 630ab29120b5 drm/i915/backlight: extract backlight code to a separate > > > file > > > 9f8558c5c642 ieee802154/adf7242: defer destroy_workqueue call > > > 222bd95c89b1 bpf, cgroup: Fix kernel BUG in purge_effective_progs > > > 1c518476ceb4 bpf: Restrict bpf_sys_bpf to CAP_PERFMON > > > de22cba333d8 skmsg: Fix wrong last sg check in sk_msg_recvmsg() > > > 7497f9766f08 iio: adc: mcp3911: make use of the sign bit > > > 9e1f74294d53 platform/x86: pmc_atom: Fix SLP_TYPx bitfield mask > > > 1a785b435276 drm/msm/dsi: Fix number of regulators for SDM660 > > > ab8533946db7 drm/msm/dsi: Fix number of regulators for msm8996_dsi_cfg > > > 0a4f633548c4 drm/msm/dp: delete DP_RECOVERED_CLOCK_OUT_EN to fix tps4 > > > e8bd54b0664b drm/msm/dsi: fix the inconsistent indenting > > > > > > Signed-off-by: Bruce Ashfield <bruce.ashfi...@gmail.com> > > > --- > > > .../linux/linux-yocto-rt_5.15.bb | 6 ++--- > > > .../linux/linux-yocto-tiny_5.15.bb | 6 ++--- > > > meta/recipes-kernel/linux/linux-yocto_5.15.bb | 26 +++++++++---------- > > > 3 files changed, 19 insertions(+), 19 deletions(-) > > > > > > diff --git a/meta/recipes-kernel/linux/linux-yocto-rt_5.15.bb > > > b/meta/recipes-kernel/linux/linux-yocto-rt_5.15.bb > > > index 1144cf1bfd..65a0b5c5a4 100644 > > > --- a/meta/recipes-kernel/linux/linux-yocto-rt_5.15.bb > > > +++ b/meta/recipes-kernel/linux/linux-yocto-rt_5.15.bb > > > @@ -11,13 +11,13 @@ python () { > > > raise bb.parse.SkipRecipe("Set PREFERRED_PROVIDER_virtual/kernel > > > to linux-yocto-rt to enable it") > > > } > > > > > > -SRCREV_machine ?= "4c435c4647d58aa41f423efb1fc461dafc70b619" > > > -SRCREV_meta ?= "cbf9741b1cbc3e22bbe17f4e20920df4f46eb4d3" > > > +SRCREV_machine ?= "98f38e83ef2d2b00de16c507c308bd806661a53f" > > > +SRCREV_meta ?= "81c59906067bcb77841113c76daad85fb94688d6" > > > > > > SRC_URI = > > > "git://git.yoctoproject.org/linux-yocto.git;branch=${KBRANCH};name=machine > > > \ > > > > > > git://git.yoctoproject.org/yocto-kernel-cache;type=kmeta;name=meta;branch=yocto-5.15;destsuffix=${KMETA}" > > > > > > -LINUX_VERSION ?= "5.15.65" > > > +LINUX_VERSION ?= "5.15.68" > > > > > > LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46" > > > > > > diff --git a/meta/recipes-kernel/linux/linux-yocto-tiny_5.15.bb > > > b/meta/recipes-kernel/linux/linux-yocto-tiny_5.15.bb > > > index a9f32bd5d5..358501fc2e 100644 > > > --- a/meta/recipes-kernel/linux/linux-yocto-tiny_5.15.bb > > > +++ b/meta/recipes-kernel/linux/linux-yocto-tiny_5.15.bb > > > @@ -5,7 +5,7 @@ KCONFIG_MODE = "--allnoconfig" > > > > > > require recipes-kernel/linux/linux-yocto.inc > > > > > > -LINUX_VERSION ?= "5.15.65" > > > +LINUX_VERSION ?= "5.15.68" > > > LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46" > > > > > > DEPENDS += "${@bb.utils.contains('ARCH', 'x86', 'elfutils-native', '', > > > d)}" > > > @@ -14,8 +14,8 @@ DEPENDS += "openssl-native util-linux-native" > > > KMETA = "kernel-meta" > > > KCONF_BSP_AUDIT_LEVEL = "2" > > > > > > -SRCREV_machine ?= "27747392d509aa1562545466cfecb627557676b2" > > > -SRCREV_meta ?= "cbf9741b1cbc3e22bbe17f4e20920df4f46eb4d3" > > > +SRCREV_machine ?= "35d0c78ae3efd6fe1c4fcbf4c8b0d7f43fc2aff7" > > > +SRCREV_meta ?= "81c59906067bcb77841113c76daad85fb94688d6" > > > > > > PV = "${LINUX_VERSION}+git${SRCPV}" > > > > > > diff --git a/meta/recipes-kernel/linux/linux-yocto_5.15.bb > > > b/meta/recipes-kernel/linux/linux-yocto_5.15.bb > > > index cbe3f0b0dc..3b4eb4d844 100644 > > > --- a/meta/recipes-kernel/linux/linux-yocto_5.15.bb > > > +++ b/meta/recipes-kernel/linux/linux-yocto_5.15.bb > > > @@ -13,24 +13,24 @@ KBRANCH:qemux86 ?= "v5.15/standard/base" > > > KBRANCH:qemux86-64 ?= "v5.15/standard/base" > > > KBRANCH:qemumips64 ?= "v5.15/standard/mti-malta64" > > > > > > -SRCREV_machine:qemuarm ?= "86cc7ffeba75d76077270ba98ff84cb48b7134ca" > > > -SRCREV_machine:qemuarm64 ?= "9ce45e4f8bd9fcccbee7e97873753a8a9ea49ba6" > > > -SRCREV_machine:qemumips ?= "c82ae040723f1c19c76d1ae263945b46af2a58fb" > > > -SRCREV_machine:qemuppc ?= "4b4bfed43fcd28ddaa55d518f56dd35dc66286d3" > > > -SRCREV_machine:qemuriscv64 ?= "9399d814f017335d9b8e310bcd4000c0722619fc" > > > -SRCREV_machine:qemuriscv32 ?= "9399d814f017335d9b8e310bcd4000c0722619fc" > > > -SRCREV_machine:qemux86 ?= "9399d814f017335d9b8e310bcd4000c0722619fc" > > > -SRCREV_machine:qemux86-64 ?= "9399d814f017335d9b8e310bcd4000c0722619fc" > > > -SRCREV_machine:qemumips64 ?= "f165a8d9cead8022974a88435c9ca4e69c697be9" > > > -SRCREV_machine ?= "9399d814f017335d9b8e310bcd4000c0722619fc" > > > -SRCREV_meta ?= "cbf9741b1cbc3e22bbe17f4e20920df4f46eb4d3" > > > +SRCREV_machine:qemuarm ?= "1e5a26d496c1671b38474e191bb748a47dc7dc59" > > > +SRCREV_machine:qemuarm64 ?= "e4f332a5c08ddebbd1a36cff5270e5eebe278cf4" > > > +SRCREV_machine:qemumips ?= "4dd7bbdb60c07d2861468a9c8545ac9e97ba400d" > > > +SRCREV_machine:qemuppc ?= "c1ddaa69dd463a11645cc5362a3200dbce28d664" > > > +SRCREV_machine:qemuriscv64 ?= "c9162b76e4f4dad76ff499cf427f45f3383b8a57" > > > +SRCREV_machine:qemuriscv32 ?= "c9162b76e4f4dad76ff499cf427f45f3383b8a57" > > > +SRCREV_machine:qemux86 ?= "c9162b76e4f4dad76ff499cf427f45f3383b8a57" > > > +SRCREV_machine:qemux86-64 ?= "c9162b76e4f4dad76ff499cf427f45f3383b8a57" > > > +SRCREV_machine:qemumips64 ?= "481a521e65375aeef6b8903c8df6fc2b23a184b8" > > > +SRCREV_machine ?= "c9162b76e4f4dad76ff499cf427f45f3383b8a57" > > > +SRCREV_meta ?= "81c59906067bcb77841113c76daad85fb94688d6" > > > > > > # set your preferred provider of linux-yocto to 'linux-yocto-upstream', > > > and you'll > > > # get the <version>/base branch, which is pure upstream -stable, and the > > > same > > > # meta SRCREV as the linux-yocto-standard builds. Select your version > > > using the > > > # normal PREFERRED_VERSION settings. > > > BBCLASSEXTEND = "devupstream:target" > > > -SRCREV_machine:class-devupstream ?= > > > "633c3b4c71bb949de771388de213d331c1ebd270" > > > +SRCREV_machine:class-devupstream ?= > > > "dd20085f2a88b6cdb12bdcdbd2d7a761c86b184a" > > > PN:class-devupstream = "linux-yocto-upstream" > > > KBRANCH:class-devupstream = "v5.15/base" > > > > > > @@ -38,7 +38,7 @@ SRC_URI = > > > "git://git.yoctoproject.org/linux-yocto.git;name=machine;branch=${KBRA > > > > > > git://git.yoctoproject.org/yocto-kernel-cache;type=kmeta;name=meta;branch=yocto-5.15;destsuffix=${KMETA}" > > > > > > LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46" > > > -LINUX_VERSION ?= "5.15.65" > > > +LINUX_VERSION ?= "5.15.68" > > > > > > DEPENDS += "${@bb.utils.contains('ARCH', 'x86', 'elfutils-native', '', > > > d)}" > > > DEPENDS += "openssl-native util-linux-native" > > > -- > > > 2.19.1 > > > > > > > > > > > > > > > > -- > - Thou shalt not follow the NULL pointer, for chaos and madness await > thee at its end > - "Use the force Harry" - Gandalf, Star Trek II
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#171007): https://lists.openembedded.org/g/openembedded-core/message/171007 Mute This Topic: https://lists.openembedded.org/mt/93782013/21656 Group Owner: openembedded-core+ow...@lists.openembedded.org Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
