Dnia wtorek, 9 marca 2010 o 23:25:22 Ulf Samuelsson napisaĆ(a): > I have built a custom variant of x11-gpe-image for the SAM9M10.
Which machine in OE covers that board? I have to admit that I did not tried to hack mine. > When gpe is started, the Y direction seems to be compressed. > When I start the calculator and press at the top of the screen, > the calculator buttons 5 mm below gets pressed. > When I press at the bottom of the screen, the buttons 5 mm above > gets pressed. > > Changing /etc/pointercal manually seems to have no effect > > It's like pointercal gets ignored. > > When others run the same kernel with minor config changes > using the stable branch ans xserver-kdrive, this phenomena > does not happen. Check do you have kdrive or xorg with evdev or tslib driver. Regards, -- JID: h...@jabber.org Website: http://marcin.juszkiewicz.com.pl/ LinkedIn: http://www.linkedin.com/in/marcinjuszkiewicz _______________________________________________ Openembedded-devel mailing list Openembedded-devel@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel