Ulf Samuelsson skrev: > Marcin Juszkiewicz skrev: >> Dnia wtorek, 9 marca 2010 o 23:25:22 Ulf Samuelsson napisaĆ(a): >>> I have built a custom variant of x11-gpe-image for the SAM9M10. >> >> Which machine in OE covers that board? I have to admit that I did not >> tried to hack mine. > > I am building the SAM9G45EK, but I am using a 2.6.30 kernel > patched with maxim.org.za + www.linux4sam.org .exp3 patches > instead of the 2.6.32 currently in openembedded. > > Also updated bootstrap and u-boot, but that won't affect this. > >> >>> When gpe is started, the Y direction seems to be compressed. >>> When I start the calculator and press at the top of the screen, >>> the calculator buttons 5 mm below gets pressed. >>> When I press at the bottom of the screen, the buttons 5 mm above >>> gets pressed. >>> >>> Changing /etc/pointercal manually seems to have no effect >>> >>> It's like pointercal gets ignored. >>> >>> When others run the same kernel with minor config changes >>> using the stable branch ans xserver-kdrive, this phenomena >>> does not happen. >> >> Check do you have kdrive or xorg with evdev or tslib driver. >> > > I will check, when I am back home.
xserver-xorg-2_1.7.4-r0 tslib-1.0-r23.3 xtscal-0.6.3-r7 xf86-input-evdev-1_2.3.2-r10 calibrateproto-2_0.0+r0+gitr1da6fd1e2c7a49648245c98481fabea8b9690a8c-r0 libxcalibrate-2_0.0+r0+gitr209d83af61ed38a002c8096377deac292b3e396c-r0 There is no PREFERRED_PROVIDER_xserver defined. > Will also send the patches I added. > >> Regards, > BR > /Ulf > > > > _______________________________________________ > Openembedded-devel mailing list > Openembedded-devel@lists.openembedded.org > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel -- Best Regards Ulf Samuelsson _______________________________________________ Openembedded-devel mailing list Openembedded-devel@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel