Here are the results, the same as before, in the build directories all seems fine but the final output only has the /usr/share/man/man8/files
in oe-layersetup/build/arago-tmp-external-arago-toolchain/work/armv7a-vfp-neon-oe-linux-gnueabi/pure-ftpd-1.0.29-r0/image/usr/sbin are the following files: pure-authd pure-ftpd pure-ftpwho pure-mrtginfo pure-quotacheck pure-uploadscript in oe-layersetup/build/arago-tmp-external-arago-toolchain/work/armv7a-vfp-neon-oe-linux-gnueabi/pure-ftpd-1.0.29-r0/image/usr/bin are the following files: pure-pw pure-pwconvert pure-statsdecode in oe-layersetup/build/arago-tmp-external-arago-toolchain/work/armv7a-vfp-neon-oe-linux-gnueabi/pure-ftpd-1.0.29-r0/image/usr/share/man/man8 pure-authd.8 pure-ftpd.8 pure-ftpwho.8 pure-mrtginfo.8 pure-pw.8 pure-pwconvert.8 pure-quotacheck.8 pure-statsdecode.8 pure-uploadscript.8 hirst689@hirst689-HP-Z210-Workstation:~/oe-layersetup/build/arago-tmp-external-arago-toolchain/deploy/images$ tar tvf tisdk-rootfs-image-am335x-evm.tar.gz | grep pure* -rw-r--r-- root/root 4151 2013-03-22 12:36 ./usr/share/man/man8/pure-uploadscript.8 -rw-r--r-- root/root 3187 2013-03-22 12:36 ./usr/share/man/man8/pure-pw.8 -rw-r--r-- root/root 2169 2013-03-22 12:36 ./usr/share/man/man8/pure-quotacheck.8 -rw-r--r-- root/root 1123 2013-03-22 12:36 ./usr/share/man/man8/pure-statsdecode.8 -rw-r--r-- root/root 764 2013-03-22 12:36 ./usr/share/man/man8/pure-pwconvert.8 -rw-r--r-- root/root 4160 2013-03-22 12:36 ./usr/share/man/man8/pure-authd.8 -rw-r--r-- root/root 2119 2013-03-22 12:36 ./usr/share/man/man8/pure-mrtginfo.8 -rw-r--r-- root/root 28755 2013-03-22 12:36 ./usr/share/man/man8/pure-ftpd.8 -rw-r--r-- root/root 2449 2013-03-22 12:36 ./usr/share/man/man8/pure-ftpwho.8 On Fri, Mar 22, 2013 at 11:02 AM, David Hirst <hirst...@gmail.com> wrote: > I did a bitbake tisdk-rootfs-image -c clean > I will try the cleanstate > It seems really difficult to get started from an absolutely clean slate, > some where status is held that gets in the way > I will let you know > > Thanks so far > > > > > On Fri, Mar 22, 2013 at 10:51 AM, Gary Thomas <g...@mlbassoc.com> wrote: > >> On 2013-03-22 08:42, David Hirst wrote: >> >>> OK, >>> Sorry for the carpet bombing! I added this to tisdk-rootfs-image >>> "task-arago-xyz \" to look for the new task file >>> I have included the task and pure-ftpd bb files also. I would love to >>> understand why this does not work. >>> >> >> What steps did you run after making this change? >> What version of bitbake are you using? >> >> Most likely, bitbake did not [fully] realize that you made a change. >> I'd try something like this: >> % bitbake tisdk-rootfs-image -c cleansstate >> % bitbake tisdk-rootfs-image >> and see what happens. >> >> BTW, top-posting is evil :-( >> >> >>> ==========================tisd**k-rootfs-image.bb<http://tisdk-rootfs-image.bb> >>> =============**=============== >>> # Arago TI SDK filesystem image >>> COMPATIBLE_MACHINE = "omap3|omapl138|ti33x" >>> >>> require arago-base-tisdk-image.bb >>> >>> IMAGE_INSTALL += "\ >>> task-arago-test \ >>> task-arago-tisdk-graphics \ >>> task-arago-tisdk-qte \ >>> task-arago-tisdk-addons \ >>> task-arago-tisdk-connectivity \ >>> task-arago-tisdk-crypto \ >>> task-arago-tisdk-matrix \ >>> task-arago-tisdk-multimedia \ >>> task-arago-tisdk-amsdk \ >>> task-arago-xyz \ >>> " >>> >>> export IMAGE_BASENAME = "tisdk-rootfs-image" >>> >>> =================task-arago.**xyz.bb <http://task-arago.xyz.bb> >>> ================ >>> >>> DESCRIPTION = "Extended task to get extras" >>> LICENSE = "MIT" >>> LIC_FILES_CHKSUM = >>> "file://${COREBASE}/meta/**COPYING.MIT;md5=** >>> 3da9cfbcb788c80a0384361b4de204**20" >>> PR = "r0" >>> >>> inherit task >>> >>> ARAGO_XYZ = " \ >>> pure-ftpd \ >>> " >>> >>> ARAGO_XYZ_INT = "\ >>> ${ARAGO_XYZ} \ >>> " >>> RDEPENDS_${PN} = "\ >>> ${ARAGO_XYZ_INT} \ >>> " >>> ===============pure-ftpd_1.0.**29.bb <http://pure-ftpd_1.0.29.bb> >>> ==================== >>> >>> DESCRIPTION = "Sample program" >>> LICENSE = "GPLv2" >>> LIC_FILES_CHKSUM = "file://COPYING;md5=**d7b47170f564f6a314b82b3ea67a40* >>> *bd" >>> PR = "r0" >>> PV = "1.0.29" >>> DEPENDS = "" >>> RPROVIDES = "pure-ftpd" >>> PROVIDES = "pure-ftpd" >>> ARM_INSTRUCTION_SET = "arm" >>> >>> PARALLEL_MAKE = "" >>> >>> inherit autotools pkgconfig >>> >>> EXTRA_OECONF = "--enable-cross-compile --host=arm-arago-linux-**gnueabi" >>> >>> SRC_URI = " >>> http://iweb.dl.sourceforge.**net/project/pureftpd/Pure-** >>> FTPd/1.0.29/pure-ftpd-${PV}.**tar.gz<http://iweb.dl.sourceforge.net/project/pureftpd/Pure-FTPd/1.0.29/pure-ftpd-$%7BPV%7D.tar.gz> >>> " >>> SRC_URI[md5sum] = "**e0132a51357d419f8b66e8997d9dc5**fa" >>> SRC_URI[sha256sum] = >>> "**55bfb84fa63a37e5b56906afb4444f**da7285d0f8b5ed24798f59c978ddea**2749" >>> S = "${WORKDIR}/pure-ftpd-${PV}" >>> >>> EXTRA_OECONF_append_armv6 = " --enable-armv6" >>> EXTRA_OECONF_append_armv7a = " --enable-armv6 --enable-neon" >>> >>> FULL_OPTIMIZATION = "-fexpensive-optimizations -fomit-frame-pointer >>> -frename-registers -O4 -ffast-math" >>> BUILD_OPTIMIZATION = "${FULL_OPTIMIZATION}" >>> >>> do_configure(){ >>> oe_runconf ${EXTRE_OECONF} >>> } >>> >>> do_compile () { >>> oe_runmake >>> } >>> >>> do_install () { >>> oe_runmake install DESTDIR=${D} >>> } >>> >>> >>> ARM_INSTRUCTION_SET = "arm" >>> >>> BBCLASSEXTEND = "native" >>> >>> ============================ END=========================== >>> >>> On Fri, Mar 22, 2013 at 10:30 AM, Gary Thomas <g...@mlbassoc.com> wrote: >>> >>> On 2013-03-22 08:24, David Hirst wrote: >>>> >>>> Hi, >>>>> I have been struggling with a oe/bitbake issue. I wanted to add >>>>> an >>>>> other .bb to the image file. >>>>> I have tried multiple ways but always end up at the same spot. I have >>>>> created a new task-XXX.bb file which includes my bb >>>>> I edited the XXXX-rootfs-image.bb to include the task-XXX.bb. >>>>> Once built I find that everything built fine and the new recipe was >>>>> built >>>>> but was not loaded into the XXXX-rootfs-image.tar,gz. >>>>> If I look into the image directory for the bb file I see the compiled >>>>> application in usr/sbin. >>>>> I have tried this with my own .bb file and net-snmp bb file which comes >>>>> with the default oe-layersetup installation with the same result. >>>>> Did I not edit a file or miss some other required step? >>>>> >>>>> >>>>> Wow, the same question on three mailing lists (that I read, there >>>> may be more...) and no cross-posting! >>>> >>>> This list is perhaps the most appropriate one for your question. >>>> >>>> More details will help. Exactly what did you change in the >>>> "XXXX-rootfs-image.bb" >>>> recipe? >>>> >>>> -- >>>> ------------------------------****----------------------------**-- >>>> >>>> Gary Thomas | Consulting for the >>>> MLB Associates | Embedded world >>>> ------------------------------****----------------------------**-- >>>> >>>> ______________________________****_________________ >>>> Openembedded-devel mailing list >>>> Openembedded-devel@lists.**ope**nembedded.org <http://openembedded.org> >>>> <Openembedded-**de...@lists.openembedded.org<Openembedded-devel@lists.openembedded.org> >>>> > >>>> http://lists.linuxtogo.org/****cgi-bin/mailman/listinfo/**** >>>> openembedded-devel<http://lists.linuxtogo.org/**cgi-bin/mailman/listinfo/**openembedded-devel> >>>> <http://**lists.linuxtogo.org/cgi-bin/**mailman/listinfo/openembedded-* >>>> *devel<http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel> >>>> > >>>> >>>> >>> >>> >>> >> -- >> ------------------------------**------------------------------ >> Gary Thomas | Consulting for the >> MLB Associates | Embedded world >> ------------------------------**------------------------------ >> >> ______________________________**_________________ >> Openembedded-devel mailing list >> Openembedded-devel@lists.**openembedded.org<Openembedded-devel@lists.openembedded.org> >> http://lists.linuxtogo.org/**cgi-bin/mailman/listinfo/** >> openembedded-devel<http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel> >> > > > > -- > David Hirst > hirst...@gmail.com > > -- David Hirst hirst...@gmail.com _______________________________________________ Openembedded-devel mailing list Openembedded-devel@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel