>> Ok. Errors loading modules cause the modules are for 2.6.2xx and
>> intoxicated is 2.6.16-4. I have got the kernel config file for
>> intoxicated. where can i get compiled modules for intoxicated and the
>> config file for zImage-2.6.23-ezxdev-r2-a780-20071101192618.bin.
>> diffing the two might give me a clue.
>
> Just ignore the modules for now. Everything (which matters) is
> built-in on the -intoxicated kernel.
i get a login prompt, but cant use the keypad - keypress returns junk -
cause i presume keymaps or some such is not loaded or the modules arent
loaded. so ho do i login?
> OR, you can compile the kernel and modules by yourself, the only
> change on the -intoxicated kernel is:
>
> +/* check power down condition */
> +static inline void check_power_off(void)
> +{
> + if (pxa_gpio_get_value(GPIO_BB_WDI2) == 0) {
> + DEBUGP("BP request poweroff!\n");
> + /*
> + * It is correct to power off here, the following line is
> + * commented out because e680 lowers WDI2 when BP is in
> + * flash mode, otherwise WDI2 is used to detect low
> + * battery. You can safely uncomment this line if you are
> + * using this kernel with BP in normal mode.
> + */
> +#ifndef CONFIG_PXA_EZX_E680
> + pm_power_off();
> +#endif
> + }
> +}
>
> The -intoxicated kernel never calls pm_power_off() on ezx-bp.c. Note
> that this power off issue only happens when BP is in flash mode, eg.
> you can flash any NON -intoxicated kernel and it will work when
> flashed.
>
> OR, you can wait until i get home, and i will fix it and provide you a
> compiled zImage and matching modules.
thanks I will be obliged. I havent installed a toolchain as yet. will do
so on monday. I use debain sarge. any recomendations / hints?
>
> --
> Daniel Ribeiro
>
>
>
