Hello. On Wed, 2008-12-03 at 22:02, Fábio Belavenuto wrote: > > Sorry for my bad english, i'm from Brazil :)
Seems the EZX devices are popular in Brazil. ;) > I put a command in file "arch/arm/mach-pxa/ezx.c", in end of function > "ezx_pcap_init()": > "ezx_pcap_set_vreg(V6, V_EN, 1);" > For power-on the BCM2045 chip. Can you send us your changes in patch form for this? Easier to review and commit for us. (I know you did this already for the fm chip) > After compiling and booting the kernel, the simple command in userspace: > "hciattach /dev/ttyS1bcm2035 460800 flow 01:02:03:04:05:06" works!! > The BCM2045 in A1200 works normally, the hciconfig, sdptool, etc works, > and I can create RFCOMM and BNEP connections. > The firmware patch from Motorola is not necessary, possibly for audio > routing between AP->BT and BP->BT. Good news. Seems to be inline with what Daniel found out about the BT on other devices. > The BCM2045 chip is always poweron, the next step is make a way for > poweron/off the chip via userspace, but it is for the future. One way would be sysfs another way would be using the rfkill infrastructure. regards Stefan Schmidt
