Daniel, can you tell me how to check host dmesg? I've never used this.
2009/6/16 Daniel Ribeiro <drw...@gmail.com> > Em Ter, 2009-06-16 às 23:04 +0800, 龙智 escreveu: > > I tried many times, and exactly get the same result. I did that as > > following: > > 1. upload kernel to the phone, cause the white screen > > 2. remove the battery, and then put it back as soon as possible > > 3. run boot_usb setflag usb & boot_usb gen-blob 0 to enter gen-blob > > USB mode, then LCD display: > > OpenEzx blob 090504 > > USB ready > > 4. run boot_usb read 0xa0000000 31457280 memdump, I got: > > $Id: boot_usb.c 2462 2009-04-12 22:55:17Z ao2 $ > > Serching for EZX phone: Generic Blob found. > > Downloading: FAILED: download failed > > is there anything else I should pay attention? > > Dont know. It "Just Works(TM)" here. Im using gen-blob on flash, but as > I said, it shouldn't make a difference. > > Check your host dmesg to see if you have an usb reenumeration after you > send gen-blob to the phone. If not, then unplug/plug the usb cable to > force the reenumeration. > > > BTW, when I flash gen-blob to the > > phone(http://wiki.openezx.org/Dual_Boot_GEN2) , I also get the same > > error. > -- > Daniel Ribeiro > -- Samuel Goldwyn<http://www.brainyquote.com/quotes/authors/s/samuel_goldwyn.html> - "I'm willing to admit that I may not always be right, but I am never wrong."