Hi Rafiu Sorry for not being clear on this.
I'm able to create a partition of mode=primary and partition type=physical volume in the 'Physical Storage Mgmt' module but after that I can't do anything else. It's not possible to create a volume group in the 'Volume Group Mgmt.' (no physical volumes to add). So I can't create a new volume of type iSCSI before I have configured a volume group. It seems like the server did not discover the new created partition. I rebooted server but still partition is not visible in the 'Volume Group Mgmt.'. Best regards Michael Bang Hi, Michael Hoffmann Bang wrote: > > Hi, > > > > OF installed on an HP DL360G3 1*cpu with hyperthreading and 1.5 GB > memory, 2*36GB scsi as 2 logical drives on a Smart Array 5i raid > controller. Openfiler installed on SCSI device 0 and iSCSI volume > intended for SCSI device 1. > > > > 1. Installed 2.0 Beta1 > 2. Yum update > 3. Could not start iSCSI service > 4. Yum install iscsitarget-kernel-smp > 5. Rebooted server > 6. iSCSI service could now enables. > 7. Still not able to create physical volume of type iSCSI (only > primary). > You create iSCSI devices in the "Create New Volume" section. You are currently trying to do it in the wrong place. Select Filesystem type of iSCSI when creating a logical volume. Also, iSCSI type devices have network ACLs enabled, so once it's been created, you need to edit it select which networks are allowed to access it. KR Rafiu. > ------------------------------------------------------------------------ > > _______________________________________________ > Openfiler-users mailing list > [email protected] > https://lists.openfiler.com/mailman/listinfo/openfiler-users > _______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users
