Hi KK, i checkout the branch to of1.0-noxdestiny. am not sure if i understand your line (The snmp_executor is not needed anymore in that branch). In OpenRoads:SNMP page, the instructions are clear about compiling the code in openroads-wifi-snmp/server & openroads-wifi-snmp/ap_subagents/ directories to create the following files ( wifi_subagent, trap_subagent and keepalive_subagent)to be transferred to the AP's later. To do that i need snmp_message.hh and without it, i have no files. The question now is: will the setup procedure change in OpenRoads:SNMP wiki page when changing to of1.0-noxdestiny branch?
Thank you,Landy --- On Wed, 6/29/11, kk yap <yap...@stanford.edu> wroteFrom: kk yap <yap...@stanford.edu> Subject: Re: [openflow-discuss] OpenRoads snmp setup page To: "man monaco" <glamourous...@yahoo.com> Cc: "OpenFlow-Discuss" <openflow-discuss@lists.stanford.edu> Date: Wednesday, June 29, 2011, 6:57 AM Hi Landy, Can you checkout the of1.0-noxdestiny branch instead? The snmp_executor is not needed anymore in that branch. There was some changes made to NOX and therefore the changes were made when we transited from OpenFlow v0.8.9 to v1.0. RegardsKK On 28 June 2011 13:02, man monaco <glamourous...@yahoo.com> wrote: Hello, Okay, so this time i brought 2 PC-Engines to setup openroads. Am following the exact instructions in OpenRoads:SNMP wiki page. The problem is i get an error message when i try to compile the sources in the directory openroads-snmp-wifi/server/ from my openflow controller. :~/openroads-wifi-snmp/server$ makeg++ -I../coreapps -lnetsnmp -o snmp_executor snmp_executor.ccsnmp_executor.cc:48: fatal error: ../../noxcore/src/nox/coreapps/snmp/snmp-message.hh: No such file or directory compilation terminated.make: *** [snmp_executor] Error 1 And :~/openroads-wifi-snmp/ap-subagents$ makenet-snmp-config --compile-subagent keepalive_subagent --cflags "-g -I ../../noxcore/src/include -I ../../noxcore/src/include/openflow -I ../../openflow/lib" keepAliveNotif.c iwlib.c snmpsys.h ../../openflow/lib/libopenflow.a setting extra cflags: -g -I ../../noxcore/src/include -I ../../noxcore/src/include/openflow -I ../../openflow/libgenerating the tmporary code file: netsnmptmp.11043.cvoid init_keepAliveNotif(void); checking for init_keepAliveNotif in keepAliveNotif.cvoid init_keepAliveNotif(void)shift: 672: can't shift that manymake: *** [keepalive_subagent] Error 2 for the first error message, I checked the file snmp-executor.cc which needs to include snmp-message.hh what doesn't exist in my system. Any idea what's wrong or where to download these files from. Thank You --- On Mon, 6/27/11, Yiannis Yiakoumis <yiann...@stanford.edu> wrote: From: Yiannis Yiakoumis <yiann...@stanford.edu> Subject: Re: [openflow-discuss] OpenRoads snmp setup page To: "kk yap" <yap...@stanford.edu> Cc: "man monaco" <glamourous...@yahoo.com>, "OpenFlow-Discuss" <openflow-discuss@lists.stanford.edu> Date: Monday, June 27, 2011, 1:19 PM Hi Landy, As KK mentioned, it's doable but it requires some work. The instructions for OpenRoads are for the PC Engines. OpenWRT supports snmp (you can install the net-snmp package on top of the given binaries or build a custom image that contains it). The main issue though is that the openroads-specific snmp extensions need to be ported to openwrt, which we haven't tried so far. These are typically compiled against the snmp-agent code, so you need to make sure that you set things in your cross-compiler accordingly. Please keep me posted in case you go forward and try to incorporate the SNMP extensions to the openwrt build. Thanks, Yiannis On Fri, Jun 24, 2011 at 10:16 AM, kk yap <yap...@stanford.edu> wrote: Hi Landy, This question would be Openwrt specific. The instructions for OpenRoads (OpenFlow Wireless) are for the PCEngine based APs. Yiannis might know the Openwrt stuff best here. From what I know, the short answer is yes. And the longer answer is you should expect some work to get there. RegardsKK On 24 June 2011 09:44, man monaco <glamourous...@yahoo.com> wrote: Hi, Am trying to setup OpenRoads to test mobility and some of my research related scenarios. I have 3 WRT54GL openflow-enabled AP's, and x86 32-bit controller. The AP's and controller are working properly. Am a bit confused about instructions on THIS PAGE. Which one is the development machine (is it my controller?). Also, what is the server, (is it the controller too?). Is it possible to add snmp to these AP's or i should get PC engines instead? Thank You,Landy _______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss _______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss _______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
_______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss