Hi Masa, the OpenFlow tutorial is mainly for OpenFlow switch in virtual machine. Is it applicable to the real topology. This is because I did not use Mininet. For the NetFPGA, i installed version 3.0.1. Is OpenFlow switch 1.0 compatible to it? Thank you!
Rebecca ________________________________ From: Masayoshi Kobayashi <mkoba...@stanford.edu> To: Rebecca Last Name <rebecca_chan...@yahoo.com> Cc: "openflow-discuss@lists.stanford.edu" <openflow-discuss@lists.stanford.edu> Sent: Friday, 18 May 2012 9:13 AM Subject: Re: [openflow-discuss] How to add flow correctly? Rebecca, It doesn't matter. You can run tcpdump on either machine. Save the tcpdump file (use option -s0 to capture the entire packet) and open it with OpenFlow wireshark to see what is wrong. I really recommend to go through OpenFlow Tutorial.. - Masa On May 17, 2012, at 5:15 PM, Rebecca Last Name wrote: > Hi Masa. The tcpdump command should be done on which PC? controller PC or > switch PC? Because dpctl command is done on switch PC to install flow > manually. Am I right? By the way, what is output i should get after tcpdump? > Thank you! >
_______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss