You are awesome, Rob. I followed your instructions, and I was able to run make successfully. Thank you.
By the way, I'm curious why in this version 01.0, I don't need to run "git checkout ...", "./boot.sh", and "./configure" as in v0.4 from "git:// openflowswitch.org/openflow.git. What is the difference? it's a little bit confusing to me! Regards, Humphrey On Mon, Dec 10, 2012 at 3:40 PM, Rob Sherwood <rob.sherw...@bigswitch.com>wrote: > Humphrey, > > It seems that your problems are much more about your environment and > your java install than the flowvisor, so perhaps this isn't the best > place to try to resolve this. > > That said, from the errors you're seeing, the problematic command is > not 'java' which seems to run fine, but the java compiler 'javac'. > > Specifically you seem to have installed the java *runtime* environment > (jre==java runtime environment) but my guess is that you have not > installed the java *developers* kit (jdk). Try `sudo apt-get install > openjdk-6-jdk` and then `make clean ; make` again. > > If that doesn't work, then my guess is you have larger problems with > your system. > > - Rob > . > > On Sun, Dec 9, 2012 at 11:34 PM, Humphrey Lee <iramani...@gmail.com> > wrote: > > Here is my Java version info: > > hon@ubuntu:/home/project/flowvisor$ java -version > > java version "1.6.0_24" > > OpenJDK Runtime Environment (IcedTea6 1.11.5) > (6b24-1.11.5-0ubuntu1~12.04.1) > > OpenJDK Server VM (build 20.0-b12, mixed mode) > > hon@ubuntu:/home/project/flowvisor$ > > > > > > On Mon, Dec 10, 2012 at 3:27 PM, Humphrey Lee <iramani...@gmail.com> > wrote: > >> > >> Hi Ali, > >> > >> Here is the log: > >> hon@ubuntu:/home/project/flowvisor$ make > >> ant > >> Unable to locate tools.jar. Expected to find it in > >> /usr/lib/jvm/java-6-openjdk-i386/lib/tools.jar > >> Buildfile: /home/project/flowvisor/build.xml > >> > >> init: > >> > >> compile: > >> [javac] /home/project/flowvisor/build.xml:60: warning: > >> 'includeantruntime' was not set, defaulting to build.sysclasspath=last; > set > >> to false for repeatable builds > >> > >> BUILD FAILED > >> /home/project/flowvisor/build.xml:60: Unable to find a javac compiler; > >> com.sun.tools.javac.Main is not on the classpath. > >> Perhaps JAVA_HOME does not point to the JDK. > >> It is currently set to "/usr/lib/jvm/java-6-openjdk-i386/jre" > >> > >> Total time: 0 seconds > >> make: *** [all] Error 1 > >> hon@ubuntu:/home/project/flowvisor$ > >> > >> I also run "apt-get install openjdk-6-jre" to update my jre and jdk, > but I > >> still got the above errors. > >> > >> Thanks. > >> Humphrey > >> > >> On Mon, Dec 10, 2012 at 3:16 PM, Ali Al-Shabibi > >> <ali.al-shab...@stanford.edu> wrote: > >>> > >>> Humphrey, > >>> > >>> What where the errors you got after installing make? > >>> > >>> The instructions here are the only commands you need to run. > >>> > https://github.com/OPENNETWORKINGLAB/flowvisor/wiki/Installation-from-Source > >>> > >>> -- > >>> Ali Al-Shabibi > >>> > >>> On Dec 10, 2012, at 7:55, Humphrey Lee <iramani...@gmail.com> wrote: > >>> > >>> I did install ant after I sent out the email. Then I got other make > >>> errors! > >>> > >>> Should I run "git checkout..." first? Then run ./boot.sh and > ./configure > >>> before running "make". > >>> > >>> Thanks. > >>> Humphrey > >>> > >>> On Mon, Dec 10, 2012 at 2:49 PM, Aaron Rosen <aro...@clemson.edu> > wrote: > >>>> > >>>> sudo apt-get install ant > >>>> > >>>> > >>>> On Mon, Dec 10, 2012 at 1:36 AM, Humphrey Lee <iramani...@gmail.com> > >>>> wrote: > >>>>> > >>>>> Hi Ali, > >>>>> > >>>>> Here what I did. > >>>>> 1. Download the flowvisor source. > >>>>> 2. Run "make" ==> error 127 > >>>>> > >>>>> Detail log: > >>>>> hon@ubuntu:/home/project/flowvisor$ ls > >>>>> AUTHORS doc Makefile README.syslog src.tests > >>>>> BUGS Documentation README RELEASE-NOTES UPGRADING > >>>>> build.xml INSTALL README.dev scripts utilities > >>>>> COPYING lib README.md src > >>>>> hon@ubuntu:/home/project/flowvisor$ git status > >>>>> # On branch 0.10-MAINT > >>>>> nothing to commit (working directory clean) > >>>>> hon@ubuntu:/home/project/flowvisor$ make > >>>>> ant > >>>>> make: ant: Command not found > >>>>> make: *** [all] Error 127 > >>>>> hon@ubuntu:/home/project/flowvisor$ > >>>>> > >>>>> I have Ubuntu Server 12.0.4 LTS version. > >>>>> > >>>>> Please advise. > >>>>> > >>>>> Thanks. > >>>>> Humphrey > >>>>> > >>>>> > >>>>> On Sun, Dec 9, 2012 at 9:57 PM, Ali Al-Shabibi > >>>>> <ali.al-shab...@stanford.edu> wrote: > >>>>>> > >>>>>> [Please don't drop the list, responses here can be help to someone > >>>>>> else] > >>>>>> > >>>>>> You can find the install from source instructions at > >>>>>> > https://github.com/OPENNETWORKINGLAB/flowvisor/wiki/Installation-from-Source > . > >>>>>> > >>>>>> As you will see under 'Download and Build'; you only need to run > >>>>>> 'make' to build it and then follow the instruction on the rest of > that page > >>>>>> to install it. > >>>>>> > >>>>>> Hope this helps, > >>>>>> > >>>>>> -- > >>>>>> Ali > >>>>>> > >>>>>> On Dec 9, 2012, at 2:31 PM, Humphrey Lee <iramani...@gmail.com> > wrote: > >>>>>> > >>>>>> > Thank you for your quick response, Ali. > >>>>>> > > >>>>>> > I was trying to build from the source, instead of installing the > >>>>>> > binary version. > >>>>>> > > >>>>>> > I tried to look for instructions to build the source code on the > URL > >>>>>> > you sent . I could only found the instruction to download the > source, but no > >>>>>> > instructions to build it. > >>>>>> > > >>>>>> > To build code successfully as I did for the older version, I think > >>>>>> > the "git checkout -b ..." command must be executed. > >>>>>> > > >>>>>> > I appreciate your help. > >>>>>> > > >>>>>> > Regards, > >>>>>> > Humphrey > >>>>>> > > >>>>>> > Ali Al-Shabibi 於 2012年12月9日星期日寫道： > >>>>>> > (Please don't drop the list) > >>>>>> > > >>>>>> > To get the latest flowvisor, you should either checkout the master > >>>>>> > or the 0.10-MAINT branch. Have a look at > >>>>>> > https://github.com/OPENNETWORKINGLAB/flowvisor/wiki for > installation > >>>>>> > instructions. > >>>>>> > > >>>>>> > -- > >>>>>> > Ali Al-Shabibi > >>>>>> > > >>>>>> > On Dec 9, 2012, at 9:28, Humphrey Lee <iramani...@gmail.com> > wrote: > >>>>>> > > >>>>>> >> Hi Ali, > >>>>>> >> > >>>>>> >> I downloaded version 0.10.0 source by "git clone > >>>>>> >> git://github.com/OPENNETWORKINGLAB/flowvisor.git". > >>>>>> >> > >>>>>> >> I wanted to compile it, but I don't know how to specify this > >>>>>> >> command "git checkout -b fv0.4_of1.0 origin/deprecated/of-0.89", > as an > >>>>>> >> example found on a OpenFlow document. What numbers should I use > to replace > >>>>>> >> those fv0.4_of_1.0? Please advise. > >>>>>> >> > >>>>>> >> Thank you. > >>>>>> >> > >>>>>> >> Cheers, > >>>>>> >> Humphrey > >>>>>> >> > >>>>>> >> On Fri, Dec 7, 2012 at 9:10 PM, Ali Al-Shabibi > >>>>>> >> <ali.al-shab...@stanford.edu> wrote: > >>>>>> >> Hi Humphrey, > >>>>>> >> > >>>>>> >> The latest version of flowvisor can be obtained from > >>>>>> >> http://www.flowvisor.org. Let me know if you need help with the > >>>>>> >> installation. > >>>>>> >> > >>>>>> >> The FV versions on gitosis are very old and it looks like they > are > >>>>>> >> pre-1.0 versions. You'll find the latest FV (0.10.0) at > flowvisor.org. > >>>>>> >> > >>>>>> >> > >>>>>> >> Cheers. > >>>>>> >> > >>>>>> >> -- > >>>>>> >> Ali > >>>>>> >> > >>>>>> >> On Dec 7, 2012, at 11:00 AM, Humphrey Lee <iramani...@gmail.com> > >>>>>> >> wrote: > >>>>>> >> > >>>>>> >> > Hello Rob, > >>>>>> >> > > >>>>>> >> > What is the latest version of FlowVisor? Is it 0.8.0. > >>>>>> >> > > >>>>>> >> > I downloaded and compiled a version from > >>>>>> >> > git://gitosis.stanford.edu/, and tried to run it on Netgear > GSM7328S. > >>>>>> >> > However, I got this error message "tcp:my switch ip-address: > 35380: version > >>>>>> >> > negotiation failed: we support version 0x97 to. 0x97 inclusive > but peer > >>>>>> >> > supports no later than 0x01". > >>>>>> >> > > >>>>>> >> > Does this error message mean my flowvisor version is too old? > >>>>>> >> > Does 0x97 mean that I need version 0.97? > >>>>>> >> > > >>>>>> >> > I appreciate for your help. > >>>>>> >> > > >>>>>> >> > Sincerely, > >>>>>> >> > Humphrey Lee (an OpenFlow developer) > >>>>>> >> > > >>>>>> >> > > >>>>>> >> > _______________________________________________ > >>>>>> >> > openflow-discuss mailing list > >>>>>> >> > openflow-discuss@lists.stanford.edu > >>>>>> >> > https://mailman.stanford.edu/mailman/listinfo/openflow-discuss > >>>>>> >> > >>>>>> >> > >>>>>> > >>>>> > >>>>> > >>>>> _______________________________________________ > >>>>> openflow-discuss mailing list > >>>>> openflow-discuss@lists.stanford.edu > >>>>> https://mailman.stanford.edu/mailman/listinfo/openflow-discuss > >>>>> > >>>> > >>> > >> > > > > > > _______________________________________________ > > openflow-discuss mailing list > > openflow-discuss@lists.stanford.edu > > https://mailman.stanford.edu/mailman/listinfo/openflow-discuss > > >
_______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
