I prefer catch all - will give that a shot.
I did try adding this as a permanent EP but in the LCF GnuGk sends back the
Call Signal Port as 0 or 1721, even though I added it as 1720
2012/03/30 09:58:55.647 1 RasTbl.cxx(282) New
EP|x.x.x.54:1720|e.bjn.vc:h323_ID|gateway|8358_endp
2012/03/30 09:58:55.647 2 RasTbl.cxx(1944) Add permanent
endpoint x.x.x.54:1720
Routing:
2012/03/30 09:59:55.098 3 gkauth.h(933) GKAUTH default LRQ
check ok
2012/03/30 09:59:55.098 5 Routing.h(177) ROUTING Checking
policy Internal for the request LRQ 28936
2012/03/30 09:59:55.098 2 RasTbl.cxx(1336) RASTBL Gateway
8358_endp matched as a default gateway
2012/03/30 09:59:55.098 4 RasTbl.cxx(1724) RASTBL Prefix
match for gateways:
199.48.152.54:1720
2012/03/30 09:59:55.098 5 Routing.h(183) ROUTING Policy
Internal applied to the request LRQ 28936
2012/03/30 09:59:55.098 2 RasSrv.cxx(408)
LCF|10.35.59.170|8358_endp|[email protected]:h323_ID|10.35.59.170;
2012/03/30 09:59:55.098 3 RasSrv.cxx(250) RAS Send to
10.35.59.170:1719
locationConfirm {
requestSeqNum = 28936
callSignalAddress = ipAddress {
ip = 4 octets {
xx xx xx 36 .0.6
}
port = 1721
}
rasAddress = ipAddress {
ip = 4 octets {
xx xx xx 36 .0.6
}
port = 1719
}
}
BTW the apt-get install uses GNUGK 2.3.0, not 2.3.6
Any thoughts on this?
Thanks
Maulik
On Fri, Mar 30, 2012 at 8:28 AM, Jan Willamowius <[email protected]> wrote:
> Hi,
>
> no, I meant when you use the 'catchall' policy, GnuGk will send a LCF
> for all LRQs, even if there is no endpoint that exactly matches the
> request. If thats what you want, use 'catchall'.
> If you only want to send LCFs for requests that match your endpoints,
> use the 'internal' policy.
>
> Regards,
> Jan
>
> Maulik wrote:
> > Hi Jan
> > Thx for the response - just to clarify you meant to send an LCF for s
> non registered endpt, not avoid an LCF - correct?
> >
> > Thx
> > Maulik
> >
> > Sent from my iPhone
> >
> > On Mar 30, 2012, at 12:42 AM, Jan Willamowius <[email protected]>
> wrote:
> >
> > > Hi Maulik,
> > >
> > > as you said, the latest release of GnuGk is 3.0.1. Version 3.1 is still
> > > in development and you can't get a packaged version, yet. You can get
> > > the source code from the CVS and compile it yourself, but please
> > > remember its not a release version, yet.
> > >
> > > The 'catchall' policy is available since GnuGk 2.3.1, but to avoid
> > > sending an LCF for a non existing endpoint, you might want to use the
> > > 'internal' policy instead. If your gateway doesn't register, configure
> > > it as a "permanent endpoint". See the manual for details.
> > >
> > > Regards,
> > > Jan
> > >
> > > --
> > > Jan Willamowius, Founder of the GNU Gatekeeper Project
> > > EMail : [email protected]
> > > Website: http://www.gnugk.org
> > > Support: http://www.willamowius.com/gnugk-support.html
> > >
> > >
> > > Maulik Shah wrote:
> > >> Hi All
> > >> Am a newbie to GnuGK and have looked through the aliases and a little
> > >> lost on a couple of items:
> > >>
> > >> 1. The Manuals on gnugk show they are for version 3.1 but the latest
> stable
> > >> version is 3.0.1 for Linux (Ubuntu apt-get is at 2.3.x) - how can I
> get a
> > >> Linux 64 bit tar for version 3.1?
> > >>
> > >> 2. Our basic use case for GnuGK is to act as a very simple dir GK:
> > >>
> > >> Receive LRQ from anonymous video GKs (such as Tandberg VCS) for our
> domain
> > >> (say [email protected]) and sent back an LCF with the host@GWIP port
> 1720. I
> > >> was going to use the CatchAll routing policy but when i add that to
> the
> > >> gatekeeper.ini config, I get an error saying the policy is unknown. I
> > >> cannot have our GW register as it does not support RAS, is there any
> way to
> > >> configure this on the GnuGK without CatchAll?
> > >>
> > >> Appreciate the help in advance
> > >>
> > >> Thanks
> > >> Maulik
> > >
> >
>
>
> --
> Jan Willamowius, [email protected], http://www.gnugk.org/
>
>
> ------------------------------------------------------------------------------
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here
> http://p.sf.net/sfu/sfd2d-msazure
> _______________________________________________________
>
> Posting: mailto:[email protected]
> Archive:
> http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
> Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
> Homepage: http://www.gnugk.org/
>
------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________________
Posting: mailto:[email protected]
Archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
