Hi,

please try again using the just released 3.1 version. There is at least
one bugfix that affected H.239 in conjunction with H.460.19.
(And for security reasons you should update anyway.)

Regards,
Jan

András Kovács wrote:
> Hi All,
> 
> 
> I wonder if you could advise me if GnuGK can do anything about the below 
> problem.
> 
> I have a Cisco 45xx MCU and a Cisco TCS (Content Server) registered to my 
> GnuGK 3.0.2. MCU is registered as a gateway, TCS as a terminal. I use routed 
> signalling, but H.245 is not routed.
> 
> When starting an MCU conference recording with TCS H.239 channel is not 
> established for all call scenarios and seemingly it depends on calling alias 
> or IP or enabling/disabling GnuGK registration. Here are my scenarios:
> 
> Both MCU and TCS is registered to GnuGK:
> 
> Call from MCU to TCS:
> - I call IP address: H.239: on
> - I call TCS alias: H.239: off
> 
> Call from TCS to MCU:
> - I call IP address: H.239: off
> - I call alias: H.239: off
> 
> Then I remove TCS from my gatekeeper and repeat the calls. This happens:
> 
> Call from TCS to MCU:
> H.239: on
> 
> Call from MCU to TCS:
> H.239: on
> 
> This is somewhat strange to me, as the gatekeeper should not do anything with 
> H.239 channel that is set up between the two remote parties directly...
> 
> I wonder if I could check anything on GnuGK side. I also opened a support 
> ticket at Cisco.
> 
> Thanks.
> 
> Best regards,
> Andras Kovacs

-- 
Jan Willamowius, [email protected], http://www.gnugk.org/

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________________

Posting: mailto:[email protected]
Archive: 
http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/

Reply via email to