On Tue, 2005-06-28 at 13:44, Sean Hefty wrote: > Hal Rosenstock wrote: > > Hi Sean, > > > > I'm in the process of enabling the receive side RMPP from user space and > > this is what I'm seeing in terms of RMPP right now. I have a question > > about the OpenSM side. > > > > SA client OpenSM > > SA GetTable (PortInfoRecord) --> > > <-- SA GetTableResp (PortInfoRecord) > > RMPP active, first > > payload length 0x44C > > > > retries is set to 4 so I see 4 responses (at 2 sec intervals) as the > > client is not currently ACKing. All is fine up to that point. > > > > At that point, OpenSM sees a large receive which appears to be that send > > timing out (nothing was sent nor observed on the IB wire). > > > > Could a timed out RMPP send end up as a receive somehow ? > > On the side that sent the MAD?
The side that sent the RMPP MAD response (e.g. OpenSM). > That should be no. That's what I thought. I'm not sure where the problem is but will start to try to narrow it down. > On the remote side, a send can timeout, but still be received, since the ACK > is unreliable. But I don't think that this is the situation that you're > describing. No. The remote side appears to be behaving as I would expect (at least as far as I have gone). -- Hal _______________________________________________ openib-general mailing list openib-general@openib.org http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general