> Not only that, but I've found that the Seagate ST3500413AS (500 GB > SATA 6Gb/s) won't work on my Intel SASUC8I HBA (basically an LSI > SAS3081E-R, which uses the mpt driver). It'll work just fine on an > AHCI port, but apparently the HBA can't successfully autonegotiate > the 3 Gb speed.
Did they work somewhat at first and then fail later, or did they just not work at all? In my scenario, the drives worked ok for some time, but failed en masse during high load, always one backplane failing, even after one or two of them was replaced. The errors I got was h/w and trn errors, mostly "No Device". Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 r...@karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av idiomer med fremmed opprinnelse. I de fleste tilfeller eksisterer adekvate og relevante synonymer på norsk. _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss
