Hello,
I've got a pair of OCZ Deneva R SLC SATA SSDs doing SLOG duty. They're
connected to a LSI 9211-8i dedicated to only them. Within a few minutes of
the system booting to the login prompt, each drive throws the following
message to console twice:
WARNING: /pci@0,0/pci8086,3a40@1c/pci1000,3020@0/iport@8
/disk@w5e83a97010004561,0 (sd42):
Error for Command: <undecoded cmd 0x85> Error Level: Recovered
Requested Block: 0 Error Block: 0
Vendor: ATA Serial Number:
A117D0111450
Sense Key: Soft_Error
ASC: 0x0 (<vendor unique code 0x0>), ASCQ: 0x1d, FRU: 0x0
Is that something to be worried about (they're brand new) or is it an
artifact of the SATA->SAS translation in the LSI? Thank you in advance.
-J
_______________________________________________
OpenIndiana-discuss mailing list
[email protected]
http://openindiana.org/mailman/listinfo/openindiana-discuss
