On 17/11/11 11:34 AM, Jason J. W. Williams wrote:
Hello,
I've got a pair of OCZ Deneva R SLC SATA SSDs doing SLOG duty. They're
connected to a LSI 9211-8i dedicated to only them. Within a few minutes of
the system booting to the login prompt, each drive throws the following
message to console twice:
WARNING: /pci@0,0/pci8086,3a40@1c/pci1000,3020@0/iport@8
/disk@w5e83a97010004561,0 (sd42):
Error for Command:<undecoded cmd 0x85> Error Level: Recovered
Requested Block: 0 Error Block: 0
Vendor: ATA Serial Number:
A117D0111450
Sense Key: Soft_Error
ASC: 0x0 (<vendor unique code 0x0>), ASCQ: 0x1d, FRU: 0x0
Is that something to be worried about (they're brand new) or is it an
artifact of the SATA->SAS translation in the LSI? Thank you in advance.
ASC ASCQ Meaning
00h 1Dh ATA PASS THROUGH INFORMATION AVAILABLE
The <undecoded cmd 0x85> is vendor-specific, so it looks
like this is an example of the hba sending a command that
the target doesn't understand.
Are there FMA events for this?
James C. McPherson
--
Solaris kernel software engineer, system admin and troubleshooter
http://www.jmcp.homeunix.com/blog
Find me on LinkedIn @ http://www.linkedin.com/in/jamescmcpherson
_______________________________________________
OpenIndiana-discuss mailing list
[email protected]
http://openindiana.org/mailman/listinfo/openindiana-discuss
