Hi there, I have been on the same spot. Some Motherboards that have more than 4 SATA ports, with less than 5 disks there is no problem but if you want to use the fifth port you need to choose AHCI or RAID in order to make it work.Also, check for errors on the dmesg. I had tons of problems with IDE mode and Openindiana as i installed the OS on AHCI mode. I have to change the config every time that my BIOS gets cleared.
Best regards On Tue, May 22, 2012 at 4:01 PM, Matthieu Paindavoine <ctord...@yahoo.fr>wrote: > Hello, > > I've trying to insert a sata hd in an enclosure, but it doesn't seem to be > recognized by the os. > > Low and behold, I used '#> cfgadm -al', and only usb devices come up, > nothing sata related. > > I have several sata hard drive in that machine, all of them contributing > to a zpool which work perfectly fine. > > So I don't know why they are not showing up with cfgadm? > > I read a bit about the topic, and it seems to depend on ahci being > available. > > I ran '#> dmesg | grep -i ahci' and nothing showed up > > > The motherboard is msi 890FXA-GD70, and I went in the bios: > integrated peripherals -> on-chip ATA devices -> RAID Mode : {IDE, RAID, > AHCI} and switched from IDE to AHCI > > I then restarted the machine. I got the booting screen for about 5 sec, > and then the machine reboots. > I switched back from AHCI to IDE, and this time the machine booted fine. > > So.... I'd like to know what needs to be done to be able to swap sata > drive in that machine... > > Thanks, > > Matthieu > _______________________________________________ > OpenIndiana-discuss mailing list > OpenIndiana-discuss@openindiana.org > http://openindiana.org/mailman/listinfo/openindiana-discuss > _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss