On 2013-04-25 17:11, Randy S wrote:
To clarify why I'm testing this: we have a machine in production with a nic (autonegotiation) that should be 1000Mb connected but is 100Mb connected. We already forced the switchport at 1000Mb at which point there is no connection with the OI machine. It's an onboard nic . If I cannot force the Oi nic to go 1000Mb, I guess the nic is broken... The same switch port has been tested with another machine which does connect at 1000Mb, so the switch is ok.
Did you test that other machine using the same UTP cables, or did you try other patch-cables with the problematic machine? Because I've seen cases when connections in UTP cable socket don't work (i.e. are too depressed and don't come into contact with opposing wires - and can be pulled up with a needle, or are plain dirty and should be scrubbed, or wires got broken in the cable somewhere), and in case of networking weirdness cables are definitely part of the overall problem. //Jim _______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss
