Thanks Andreas, Good suggestion, however, it didn't work...
mich@jaguar:~# zpool replace -f tank c3t4d0s1 c3t0d0 cannot replace c3t4d0s1 with c3t0d0: no such device in pool I have also tried exporting and importing the pool, as suggested in other forums. Michelle. On Tue, 3 Jun 2014 21:01:49 +0200 Andreas Wacknitz <a.wackn...@gmx.de> wrote: > Michelle, > > Am 03.06.2014 um 20:39 schrieb Michelle Knight > <miche...@msknight.com>: > > > H Folks, > > > > I've got the following... > > > > mich@jaguar:~# cfgadm -al > > Ap_Id Type Receptacle Occupant > > Condition sata0/0::dsk/c3t0d0 disk connected > > configured ok sata0/1 sata-port > > empty unconfigured ok sata0/2::dsk/c3t2d0 > > disk connected configured ok > > sata0/3::dsk/c3t3d0 disk connected configured > > ok sata0/4::dsk/c3t4d0 disk connected > > configured ok sata0/5::dsk/c3t5d0 disk > > connected configured ok > > > > mich@jaguar:~# zpool status > > pool: rpool1 > > state: ONLINE > > scan: none requested > > config: > > > > NAME STATE READ WRITE CKSUM > > rpool1 ONLINE 0 0 0 > > c3t5d0s0 ONLINE 0 0 0 > > > > errors: No known data errors > > > > pool: tank > > state: ONLINE > > scan: resilvered 1.70M in 0h0m with 0 errors on Tue Jun 3 18:19:48 > > 2014 config: > > > > NAME STATE READ WRITE CKSUM > > tank ONLINE 0 0 0 > > raidz1-0 ONLINE 0 0 0 > > c3t4d0s1 ONLINE 0 0 0 > > c3t2d0s1 ONLINE 0 0 0 > > c3t3d0s1 ONLINE 0 0 0 > > > Your zpool „tank“ consists of sliced disks (note the s1 at the end of > the device names)! This is uncommon (only the disk that the system is > booted from needs to have a slice because grub needs it). > > > errors: No known data errors > > > > > > I try ... > > > > mich@jaguar:~# zpool replace -f tank c3t4d0 c3t0d0 > > cannot replace c3t4d0 with c3t0d0: no such device in pool > > > > ... which is what I am reading in countless articles on-line to do, > > but it isn't working. I don't know why I'm getting this error, or > > which of the two it is complaining about, because if I try... > > > > mich@jaguar:~# zpool offline tank c3t4d0 > > cannot offline c3t4d0: no such device in pool > > > The error message is correct. You have c3t4d0s1 in your zpool, not > c3t4d0! When you created your „tank“ zpool you have been using sliced > disks, this is unneeded but possible… > > > > So I can't get the drive replaced. > > > I am not that experienced with it but I guess you could issue > zpool replace tank c3t4d0s1 c3t0d0 > (using the whole unsliced disk c3t0d0). > > Regards, > Andreas > > > Any help gratefully appreciated. > > > > Michelle > > > > _______________________________________________ > > openindiana-discuss mailing list > > openindiana-discuss@openindiana.org > > http://openindiana.org/mailman/listinfo/openindiana-discuss > > > _______________________________________________ > openindiana-discuss mailing list > openindiana-discuss@openindiana.org > http://openindiana.org/mailman/listinfo/openindiana-discuss _______________________________________________ openindiana-discuss mailing list openindiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss