On 01/12/21 04:21 PM, Aurélien Larcher wrote: > On Tue, Jan 12, 2021 at 4:17 PM Udo Grabowski (IMK) <udo.grabow...@kit.edu> > wrote: > >> >> >> On 12.01.21 16:10, Tony Brian Albers wrote: >>> I'm having issues getting an analogue (using a 3,5mm jack connector) >>> microphone to work properly. >>> >>> It shows up in the mate-volume-control window, but even when it's at >>> 100% volume, there's no sound level indication. The mic works, because >>> when I test it with >>> $ cat </dev/audio >>/tmp/foo.au >>> $ cat /tmp/foo.au >>/dev/audio >>> >>> I can hear the words I say, but it's awfully low and the noise level is >>> normal. The words are only just audible. >> > > Check the volume with audioctl, it defaults to 75%. > > > >>> >>> Is there a way that I can use something like mic boost? I've been >>> rummaging around in pulseaudio(pacmd etc.) all day now, but I can't find >>> anything that's not set to a 100% volume with regards to the microphone. >>> >>> Any ideas and suggestions are welcome. >> >> Maybe it's not switched on in the mixer ? >> >> _______________________________________________ >> openindiana-discuss mailing list >> openindiana-discuss@openindiana.org >> https://openindiana.org/mailman/listinfo/openindiana-discuss >> > >
No luck: tba@emu:~/temp$ audioctl show-control CONTROL VALUE volume 100 center 75 lfe 75 surround 75:75 rear 75:75 mic 50:50 line-in 50:50 front 75:75 headphones 75:75 loopback off record-source mic tba@emu:~/temp$ /tony -- Tony Albers - Systems Architect - IT Development Royal Danish Library, Victor Albecks Vej 1, 8000 Aarhus C, Denmark Tel: +45 2566 2383 - CVR/SE: 2898 8842 - EAN: 5798000792142 _______________________________________________ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss