root@jaguar:/var# iostat -En c6d1 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 Model: KINGSTON SA400S Revision: Serial No: 50026B73801BCEA Size: 120.03GB <120033607680 bytes> Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 Illegal Request: 0 c4t0d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 Vendor: ATA Product: WDC WD60EFRX-68L Revision: 0A82 Serial No: WD-WX21DA84EH0F Size: 6001.18GB <6001175126016 bytes> Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 Illegal Request: 0 Predictive Failure Analysis: 0 c4t2d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 Vendor: ATA Product: WDC WD60EFRX-68L Revision: 0A82 Serial No: WD-WX51DB880RJ4 Size: 6001.18GB <6001175126016 bytes> Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 Illegal Request: 0 Predictive Failure Analysis: 0 c4t3d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 Vendor: ATA Product: WDC WD60EFAX-68J Revision: 0A83 Serial No: WD-WX22DC0AUC60 Size: 6001.18GB <6001175126016 bytes> Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 Illegal Request: 0 Predictive Failure Analysis: 0
Output from fmadm faulty only gives the error which happened when I brought up the unit without the tank pool inserted... just in case. That's as far as I know to go. Michelle. On Sun, 2021-08-29 at 12:56 +0100, Michelle wrote: > I have the machine up and running and issued a zpool clear against > rpool. At least as long as it lasts. > > Reading things from ten years ago, I've disabled the microcode... it > seems to be all I can do. I'm not expecting that to be the issue > but... > hey. > > Nothing in /var/log/syslog which gives any clue. Last message was > 23:05 > from sendmail, and then at 11:46 on a failure to gethostbyaddr after > a > reboot. > > > > On Sun, 2021-08-29 at 12:31 +0100, Michelle wrote: > > I'm sat here, not knowing quite what I'm dealing with. > > > > OI recent build on HP N54L, as you may remember I hit a problem on > > the > > 8th August with rpool encountering an error on the SSD with the OS. > > > > I replaced the drive and had the same thing straight away. Replaced > > with another drive and took the unit down to basics including a RAM > > check and rebuilt it. It's been running until today... same thing. > > > > On the messages screen I see at just gone 00:00 this morning... > > Sense Key: aborted command > > Vendor Gen-ATA error code 0x3 > > Rpool has encountered an uncorrectable IO failure and has been > > suspended. Zpool clear will be required before the pool can be > > written > > to > > > > The rpool message repeated at 00:05, 00:22, 02:54 and at 08:54 > > ...and > > it's now stopped responding. > > > > So... I've now got no idea where to take this. On the face of it, > > the > > hardware is fine... on the face of it. However, there's something > > wrong > > here and given the history, I'm not sure where to start. > > > > Part of me thinks I'm looking at hardware... > > > > Power? Hmmm... why does the SSD fail instead of the spinning rust > > drives? > > > > Yet another hard drive? This is number three now, throwing > > suspicion > > at > > other aspects. > > > > I am reticent to just replace with another hard drive and carry on. > > I > > think it may not be to blame here. > > > > Grateful for people's thoughts. > > > > Michelle. > > > > > > _______________________________________________ > > openindiana-discuss mailing list > > openindiana-discuss@openindiana.org > > https://openindiana.org/mailman/listinfo/openindiana-discuss _______________________________________________ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss