From: Andy Green <[EMAIL PROTECTED]>

Take care to notice adapter state on boot

Signed-off-by: Andy Green <[EMAIL PROTECTED]>
---

 drivers/i2c/chips/pcf50606.c |   28 +++++++++++++++++++++++++++-
 1 files changed, 27 insertions(+), 1 deletions(-)


diff --git a/drivers/i2c/chips/pcf50606.c b/drivers/i2c/chips/pcf50606.c
index 4fecffd..a8de8aa 100644
--- a/drivers/i2c/chips/pcf50606.c
+++ b/drivers/i2c/chips/pcf50606.c
@@ -109,6 +109,7 @@ struct pcf50606_data {
        int allow_close;
        int onkey_seconds;
        int irq;
+       int coldplug_done;
 #ifdef CONFIG_PM
        struct {
                u_int8_t dcdc1, dcdc2;
@@ -580,6 +581,30 @@ static void pcf50606_work(struct work_struct *work)
        if (ret != 3)
                DEBUGPC("Oh crap PMU IRQ register read failed %d\n", ret);
 
+       if (!pcf->coldplug_done) {
+               DEBUGPC("PMU Coldplug init\n");
+
+               /* we used SECOND to kick ourselves started -- turn it off */
+               pcfirq[0] &= ~PCF50606_INT1_SECOND;
+               reg_set_bit_mask(pcf, PCF50606_REG_INT1M, PCF50606_INT1_SECOND,
+                                PCF50606_INT1_SECOND);
+
+               /* coldplug the USB if present */
+               if (__reg_read(pcf, PCF50606_REG_OOCS) & PCF50606_OOCS_EXTON) {
+                       /* Charger inserted */
+                       DEBUGPC("COLD CHGINS ");
+                       input_report_key(pcf->input_dev, KEY_BATTERY, 1);
+                       apm_queue_event(APM_POWER_STATUS_CHANGE);
+                       pcf->flags |= PCF50606_F_CHG_PRESENT;
+                       if (pcf->pdata->cb)
+                               pcf->pdata->cb(&pcf->client.dev,
+                                       PCF50606_FEAT_MBC, PMU_EVT_INSERT);
+               }
+
+               pcf->coldplug_done = 1;
+       }
+
+
        dev_dbg(&pcf->client.dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x:",
                pcfirq[0], pcfirq[1], pcfirq[2]);
 
@@ -1686,7 +1711,8 @@ static int pcf50606_detect(struct i2c_adapter *adapter, 
int address, int kind)
        pm_power_off = &pcf50606_go_standby;
 
        /* configure interrupt mask */
-       reg_write(data, PCF50606_REG_INT1M, PCF50606_INT1_SECOND);
+       /* we don't mask SECOND here, because we want one to do coldplug with */
+       reg_write(data, PCF50606_REG_INT1M, 0x00);
        reg_write(data, PCF50606_REG_INT2M, 0x00);
        reg_write(data, PCF50606_REG_INT3M, PCF50606_INT3_TSCPRES);
 


Reply via email to