xiangfu wrote:
Werner Almesberger wrote:
xiangfu wrote:
i try
--git clone http://git.openmoko.org/git/kboot-stage1.git
and it not get the Andy's patch.
You almost got it right :-) It's
git clone git://git.openmoko.org/git/kboot-stage1.git
===
- Werner
now i use openocd i get these error message, did i miss something.
Hi Xianfu,
What the default openocd config do you use?
Matt
[EMAIL PROTECTED]:~$ sudo openocd
Info: openocd.c:93 main(): Open On-Chip Debugger (2007-09-05 09:00
CEST)
Error: jtag.c:1301 jtag_examine_chain(): number of discovered
devices in JTAG chain (578) doesn't match configuration (1)
Error: jtag.c:1302 jtag_examine_chain(): check the config file and
ensure proper JTAG communication (connections, speed, ...)
Error: jtag.c:1440 jtag_init(): trying to validate configured JTAG
chain anyway...
Error: jtag.c:1357 jtag_validate_chain(): Error validating JTAG scan
chain, IR mismatch, scan returned 0x01
Error: embeddedice.c:181 embeddedice_build_reg_cache(): unknown
EmbeddedICE version (comms ctrl: 0x00000000)
Warning: telnet_server.c:545 telnet_init(): no telnet port specified,
using default port 4444
i also use dfu-kboot(write by andy) download kboot to "u-boot" partition.
when i start the GTA02 ,it 's AUX LED always blink and screen go to
light. it do not boot ,
is there something with my GTA02. or which step i am wrong.
