Andy Green wrote:
Somebody in the thread at some point said:
| i also use dfu-kboot(write by andy) download kboot to "u-boot"
partition.
| when i start the GTA02 ,it 's AUX LED always blink and screen go to
| light. it do not boot ,
| is there something with my GTA02. or which step i am wrong.
if the battery low power , is it may cause this case?
the GTA02 not charge , i always use GTA01 charge the battery ,
so i not sure the battery power.
It's just a panic from Linux (which booted OK then because there is no
red led flashing code called in kboot)... highly likely you don't have
ext2 SD Card first partition with rootfs on which will make a panic
after the drivers are all initialized.
Watch the serial console and you should see the Linux boot and at the
end say it cannot mount the filesystem or somesuch. Normal boot now
looks like this:
Openmoko KBOOT pads.home.warmcat.com andy_f029805ebc877647 Wed Aug 13
00:46:24 BST 2008
Checking kernel...
Openmoko Freerunner Kernel
Fetching kernel...
~ Done
Running Linux --->
Uncompressing
Linux.......................................................................................................................
done, booting the kernel.
[ 0.000000] Linux version 2.6.24-andy_f38e788a73434e5e-mokodev
([EMAIL PROTECTED]) (gcc version 4.1.2) #1025 PREEMPT Sat Aug
9 09:25:53 BST 2008
...
-Andy
