Hello! For some days I try to get my own (andy tracking GIT head) kernel to work. It mostly does but I cannot "find" the Wifi interface.
This means I have the S3C SDIO host driver and AR6k driver fixed in my kernel. They seem to initialise properly. But it also seems that the Wifi SDIO card is not detected properly - I do not see an eth0 interface nor do I see any obvious sysfs entries to enable or power up that hardware. I also searched the Wiki for any valuable information about it but all pages start by assuming that eth0 is present. I found /sys/bus/platform/devices/gta02-pm-wlan.0 but this does not reveal anything very interestig, only rfkill but disabling (echo 0 >) did not reveal the interface. Do I need to power it up somehow? Some needed PMinterface? Regulator setting? GPIO setting? It seems that I miss something quite fundamental here ;) But what? Any hint would be very much apperciated. Thanks! PS: I also played with GTA01 and andy-tracking head and fodun some issues - but many things do work, which is great! Cheers nils faerber -- kernel concepts GbR Tel: +49-271-771091-12 Sieghuetter Hauptweg 48 Fax: +49-271-771091-19 D-57072 Siegen Mob: +49-176-21024535 http://www.kernelconcepts.de
