Werner Almesberger schrieb: > Nils Faerber wrote: >> I am up-to-date on andy-tracking, if this is what you need to know. > Yup, thanks. > >> echo "s3c2440-sdi" > /sys/bus/platform/drivers/s3c2440-sdi/bind > > Hmm, this is with modules but otherwise the same: > > con:~# insmod s3cmci.ko > [21474595.185000] s3c2440-sdi s3c2440-sdi: host detect has no irq available > [...] > con:~# insmod ar6000.ko > [...] > [21474598.425000] AR6000 Reg Code = 0x40000060 > con:~# iwconfig > [...] > eth0 AR6000 802.11g ESSID:"" > [...] > con:~# echo s3c2440-sdi >/sys/bus/platform/drivers/s3c2440-sdi/unbind > [21474608.405000] mmc1: card 0001 removed > [...] > con:~# iwconfig eth0 > eth0 No such device
Uh, that's weird. My last messages from dmesg show: [ 74.835000] mmc1: new SDIO card at address 0001 [ 75.870000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1) [ 75.870000] eth0 (sdio_ar6000): not using net_device_ops yet [ 75.935000] AR6000 Reg Code = 0x40000060 [ 185.035000] mmc1: card 0001 removed [ 185.095000] ar6000_wow interrupt [ 185.240000] s3c2440-sdi s3c2440-sdi: powered down. [ 185.240000] s3c2440-sdi s3c2440-sdi: powered down. and eth0 still being present. PS: How do I enable the S3C OHCI USB host for Bluetooth? Here I can PM enable the BT module but it does not show up as USB device and /proc/bus/usb/ is empty altogther (but mounted) - seems to me the s3c ohci is not fully up yet... the only USB message I see is [21474537.435000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [21474537.435000] ohci_hcd: block sizes: ed 64 td 64 and the usb gadget messages of course... > - Werner Cheers nils faerber -- kernel concepts GbR Tel: +49-271-771091-12 Sieghuetter Hauptweg 48 Fax: +49-271-771091-19 D-57072 Siegen Mob: +49-176-21024535 http://www.kernelconcepts.de
