Am Samstag 13 Oktober 2007 schrieb Christian W. Zuckschwerdt: > Hi, > > basicly it should work. You are referring to baud rate (which is > auto-detected in the BFB code and 19200 is the default) but also write > about USB. What is your exact setup, if you use USB the cable type is > important (I know of three different cables -- active and passive > TTY<->USB and pure USB). > > The S45 support is the origin of obexftp and the bfb lib. More recent > phones don't require the intricate bfb mode anymore.
The MC60 has the *55 hardware base and thus requires BFB. There are three cables, the pure serial one (DCA-500), the USB-to-serial one (DCA-510) and a pure USB one (DCA-540). For >= S65, all three types should work (with some known problems, see Wiki). However, for the MC60, the DCA-540 will not work, only the DCA-510. (that is all noted in the Wiki). The baudrate is auto-detected by the phones since S45 with firmware revision >=21 but BFB add additional restrictions (like being at 19200 when entering BFB mode) Last time I checked with my S55, old BFB mode did not work well, don't remember exactly what was wrong. For the newer phone, the Plain OBEX mode works, though. I may take a look at it if there is a need for it. HS ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Openobex-users mailing list [email protected] http://lists.sourceforge.net/lists/listinfo/openobex-users
