> Debug: 165 52 stlink_usb.c:1068 stlink_usb_open(): transport: 1 vid: 0483 > pid: 3744 > Debug: 166 53 stlink_usb.c:1078 stlink_usb_open(): claim interface failed > Debug: 167 53 stlink_layout.c:50 stlink_layout_open(): failed > Debug: 168 53 command.c:630 run_command(): Command failed with error code -4 > User : 169 54 command.c:668 command_run_line(): in procedure 'transport' > Debug: 170 54 command.c:630 run_command(): Command failed with error code -4 > User : 171 54 command.c:668 command_run_line(): in procedure 'init' > Debug: 172 54 stlink_interface.c:100 stlink_interface_quit(): > stlink_interface_quit > dos@DoS-Aspire-7740:/mount/10.10/dos/INF/Projects/ARM/openocd6/openocd/tcl$
Please reconnect you hardware and check the log messages from the dmesg command: usb 1-1.1: USB disconnect, device number 50 usb 1-1.1: new full speed USB device number 53 using ehci_hcd usb 1-1.1: New USB device found, idVendor=0483, idProduct=3744 usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.1: Product: STM32 STLink usb 1-1.1: Manufacturer: STMicroelectronics usb 1-1.1: SerialNumber: 7 usb-storage 1-1.1:1.0: device ignored The last line is very important. Anyway i think there is no problem if you send your log messages to this list. Regards, Mathias On 09.03.2012 19:46, Jacek Drewniak wrote: > Hi everyone, > > I have some problem with openocd and stlink under linux. I have tried solve > it with forum, but noone > could help my beacouse there are not a lot linux users. > > I know that this kind of problem was under windows and depends of drivers. > > Ok, there is a problem: > > I cant connect openocd with my stlinkv1. I'm using openocd 0.6 from git > ripository. I added udev > rules I found in contrib dir, but this is only i get: > > http://snipt.org/uffQ1#expand <http://snipt.org/uffQ1#expand> > I added a target line to stm32f1x_stlink.cfg: > http://snipt.org/uffR5#expand > > I need tu run it with gdb to start my jurney with ARM. > > Thanks for any help. > > Regards > > Jacek Drewniak > > > > > > ------------------------------------------------------------------------------ > Virtualization & Cloud Management Using Capacity Planning > Cloud computing makes use of virtualization - but cloud computing > also focuses on allowing computing to be delivered as a service. > http://www.accelacomm.com/jaw/sfnl/114/51521223/ > > > > _______________________________________________ > OpenOCD-devel mailing list > OpenOCD-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/openocd-devel ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel