On Wed, Aug 29, 2012 at 5:10 PM, Freddie Chopin <[email protected]> wrote:
> W dniu 2012-08-29 10:36, Freddie Chopin pisze:
>> As usuall I will soon provide a Windows binary on my website.
>
> Binaries are already there:
> http://www.freddiechopin.info/
Seems to work fine as well. Tested with the same setup but with
a VirtualBox Windows 7 32bit VM under the same
Mac OS X machine. The speed is of course a bit slower than
compared to under Mac OS X because of the use of a
virtual machine.
BTW, the next version of libusbx 1.0.13 will support winusb.sys,
libusb0.sys and libusbk.sys. Then it is probably possible to
use the libusb0.sys filter driver on top of the existing vendor
driver (eg: FTDI driver) without switching to Winusb. But I encountered
some issues with the current libusbx git so that is still not working yet.
C:\work\openocd\openocd-0.6.0-rc2\bin>openocd-0.6.0-rc2 -f mpsse.cfg
Open On-Chip Debugger 0.6.0-rc2 (2012-08-29-09:22)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
adapter speed: 1000 kHz
adapter_nsrst_delay: 100
jtag_ntrst_delay: 100
cortex_m3 reset_config sysresetreq
Info : clock speed 1000 kHz
Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0x
ba00, ver: 0x3)
Info : JTAG tap: stm32f1x.bs tap/device found: 0x16410041 (mfg: 0x020, part: 0x6
410, ver: 0x1)
Info : stm32f1x.cpu: hardware has 6 breakpoints, 4 watchpoints
adapter speed: 1000 kHz
Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0x
ba00, ver: 0x3)
Info : JTAG tap: stm32f1x.bs tap/device found: 0x16410041 (mfg: 0x020, part: 0x6
410, ver: 0x1)
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x0800272c msp: 0x20000810
adapter speed: 8000 kHz
dumped 131072 bytes in 0.470677s (271.949 KiB/s)
verified 131072 bytes in 0.440634s (290.491 KiB/s)
Info : device id = 0x20036410
Info : flash size = 128kbytes
stm32x mass erase complete
wrote 131072 bytes from file dump_LCD_demo.bin in 3.775429s (33.903 KiB/s)
verified 131072 bytes in 0.480691s (266.283 KiB/s)
20480 bytes written at address 0x20000000
downloaded 20480 bytes in 0.070101s (285.303 KiB/s)
adapter speed: 1000 kHz
Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0x
ba00, ver: 0x3)
Info : JTAG tap: stm32f1x.bs tap/device found: 0x16410041 (mfg: 0x020, part: 0x6
410, ver: 0x1)
shutdown command invoked
C:\work\openocd\openocd-0.6.0-rc2\bin>openocd-0.6.0-rc2 -f nompsse.cfg
Open On-Chip Debugger 0.6.0-rc2 (2012-08-29-09:22)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
adapter speed: 1000 kHz
adapter_nsrst_delay: 100
jtag_ntrst_delay: 100
cortex_m3 reset_config sysresetreq
Info : max TCK change to: 30000 kHz
Info : clock speed 1000 kHz
Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0x
ba00, ver: 0x3)
Info : JTAG tap: stm32f1x.bs tap/device found: 0x16410041 (mfg: 0x020, part: 0x6
410, ver: 0x1)
Info : stm32f1x.cpu: hardware has 6 breakpoints, 4 watchpoints
adapter speed: 1000 kHz
Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0x
ba00, ver: 0x3)
Info : JTAG tap: stm32f1x.bs tap/device found: 0x16410041 (mfg: 0x020, part: 0x6
410, ver: 0x1)
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x0800272c msp: 0x20000810
adapter speed: 7500 kHz
dumped 131072 bytes in 5.040211s (25.396 KiB/s)
verified 131072 bytes in 0.693995s (184.439 KiB/s)
Info : device id = 0x20036410
Info : flash size = 128kbytes
stm32x mass erase complete
wrote 131072 bytes from file dump_LCD_demo.bin in 4.459303s (28.704 KiB/s)
verified 131072 bytes in 0.787970s (162.443 KiB/s)
20480 bytes written at address 0x20000000
downloaded 20480 bytes in 0.116724s (171.344 KiB/s)
adapter speed: 1000 kHz
Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0x
ba00, ver: 0x3)
Info : JTAG tap: stm32f1x.bs tap/device found: 0x16410041 (mfg: 0x020, part: 0x6
410, ver: 0x1)
shutdown command invoked
--
Xiaofan
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
