openocd-devel  

Messages by Thread

• [PATCH]: 59a4e60b86 target/riscv: Introduce `riscv set_group` command gerrit
• [PATCH]: 37a5fae163 target/riscv: add `cetrig` control gerrit
• [PATCH]: 846ee2cfd6 target/riscv: extend `trigger` controls gerrit
• [PATCH]: fdf0d1484a target/riscv: activate dm before get nextdm gerrit
• [PATCH]: b8637104b8 target, gdb_server: allow GDB compare-sections without checksum_memory gerrit
• [PATCH]: 8b7f5b5826 target/armv8: do not mark ELx banked regs as save-restore gerrit
• [PATCH]: eacf051116 jtag/drivers: Speed up OpenJTAG adapter by using async reads gerrit
• [PATCH]: 6efda86961 target.c: add warn about overwriting a breakpoint gerrit
• [PATCH]: 3f545acfb1 doc: ftdi gpio bitmask for port b gerrit
• [PATCH]: c50017ef0c helper: command: use COMMAND_HELPER for converted functions gerrit
• [PATCH]: 70bce72646 jtag/drivers: Speed up OpenJTAG adapter by using async reads gerrit
• [PATCH]: 1fa9352631 tcl/board/ti/*: Rename files using "-" separator gerrit
• [PATCH]: b315e36c63 target/armv4_5: fix register numbering overlap gerrit
• [PATCH]: 47e8fac508 tcl/interface/raspberrypi-native: adjust speed offsets gerrit
• [PATCH]: 83c62ebb81 Frequency fix for stm32f4x gerrit
• [PATCH]: c1d8ff3022 target/riscv: fix progbuf memory writes in case last write is busy gerrit
• [PATCH]: d88d7850cd target: cortex-m: defer cache identification on Cortex-M7 under reset gerrit
• [openocd:tickets] #462 Problems on arm64 host Mark W
  • [openocd:tickets] Re: #462 Problems on arm64 host Paul Fertser
  • [openocd:tickets] #462 Problems on arm64 host Mark W
  • [openocd:tickets] Re: #462 Problems on arm64 host Paul Fertser
  • [openocd:tickets] Re: #462 Problems on arm64 host Mark W
  • [openocd:tickets] Re: #462 Problems on arm64 host Paul Fertser
  • [openocd:tickets] #462 Problems on arm64 host Tormod Volden
  • [openocd:tickets] Re: #462 Problems on arm64 host Daniel Glöckner
• [PATCH]: f833247b9e target/arm_dpm: report vector catch as breakpoint gerrit
• [PATCH]: b8b6f3ec67 target/armv4_5.c: mark registers as 'save-restore' gerrit
• [PATCH]: 56d6e6dee4 target, breakpoints: report hit watchpoint in trivial case gerrit
• [PATCH]: f595972881 target/cortex_a: fix HW breakpoint length for gdb kind 3 gerrit
• [PATCH]: 7bf54f0cb5 target/cortex_a: report target in some LOG_xx calls gerrit
• [PATCH]: 3965af5a15 tcl/target: Move TI targets to ti folder gerrit
• [PATCH]: b014281a03 board/ti: Rename _swd_native.cfg as _self_hosted.cfg gerrit
• [PATCH]: 3999a4b2cf board/ti_beagle* move to board/bb.org/ folder gerrit
• [PATCH]: 56eaa04f59 board/ti_*.cfg: Move TI evm platform configurations to board/ti folder gerrit
• [PATCH]: ea4613e4a4 target/riscv: rvtrace: Add trace funnel support gerrit
• [PATCH]: cb329fb3ca target/riscv: rvtrace: Add trace timestamp support gerrit
• [PATCH]: 7ad5a5d63e target: Add coresight trace support gerrit
• [PATCH]: cb45fd5518 target/riscv: rvtrace: Add trace atbbridge support gerrit
• [PATCH]: ee2d881221 target: cstrace: Introduce `target` access interface gerrit
• [PATCH]: 38cf8f3e36 target: cstrace: Add coresight timestamp support gerrit
• [PATCH]: d003c5913c target: cstrace: Add coresight tmc support gerrit
• [PATCH]: 72e793ff05 target: Add RISC-V trace support gerrit
• [PATCH]: fd0bd8e643 target/riscv: rvtrace: Add trace encoder support gerrit
• [PATCH]: dce3227c3b target: cstrace: Add coresight funnel support gerrit
• [PATCH]: 3bcc08d56a target: cortex-m: don't query cache on hla targets gerrit
• [PATCH]: f6e4903a3c target: add NXP frdm-imx93 board support gerrit
• [PATCH]: a08be36b05 target: add NXP i.MX 91 and frdm-imx91 board support gerrit
• [PATCH]: 6ade47c892 rtt: Add start retry timeout setting gerrit
• [PATCH]: c082bd30c5 rtt: Document new start retry interval setting gerrit
• [PATCH]: 57df0271ed doc: update copyright year gerrit
• [PATCH]: 82d97bd934 rtt: Don't log repeated control block searches gerrit
• [PATCH]: ce4982837f rtt: Extend search length to ID length gerrit
• [PATCH]: 9fbcc94b53 [src/server]: segfaults on disabling of a dropped semihosting redirection YCAT-43681 gerrit
• [PATCH]: 9a4d929a7c tcl: add Espressif RISC-V config files gerrit
• [PATCH]: 326ccb20e3 RTT: Add simple start retry limit gerrit
• [PATCH]: e2bd10b1ab RTT: Implement start retry gerrit
• [PATCH]: 4a1d9c650e RTT: Add start retry interval setting gerrit
• [PATCH]: a6367ac248 tcl/target/stm32h7x: modify speed at OpenOCD initialization and drop unneeded reset-init event gerrit
• [PATCH]: eaccbaf788 openocd: rename `LOG_LEVEL_IS` to `LOG_IS_ENABLED_FOR` gerrit
• [PATCH]: 618ddb68c6 tcl/target: update riscv commands in configs gerrit
• [PATCH]: 3db05ec70b jtag/drivers: Reduce time spent in OpenJTAG scan operation gerrit
• [PATCH]: 4e13e37b60 target: semihosting: refresh URI to semihosting documentation gerrit
• [PATCH]: a4cec36d1c target/riscv: fix SV57 translation for kernel address space gerrit
• [PATCH]: 6b5630abb0 command: return OpenOCD error code as Tcl 'errorCode' gerrit
• [PATCH]: 23e0ff6939 command: on syntax error, run 'usage' inside the same cmd_ctx gerrit
• [PATCH]: 6144c9fff5 command: let 'help' and 'usage' to use command_print() gerrit
• [PATCH]: f78898f9a9 Draft: fix missing thread ID in stop reply when smp-configured hart (but not hart 0) single-stepped gerrit
• [PATCH]: cbb5e05d91 target/cortex_m: fix segfault on setting HW BP on not examined target gerrit
• [PATCH]: 9c021e8986 target: introduce active_polled flag in struct target gerrit
• [PATCH]: fbdb1c6379 target: introduce target_memory_ready() test gerrit
• [PATCH]: 59d142606b target/cortex_m: implement memory_ready() test gerrit
• [PATCH]: ab1584a3a2 target: drop useless call target_set_examined() gerrit
• Double assert of SRST using "reset halt" Neil Shipp
• [PATCH]: c4e746075e server: rtos: don't fake step for hwthread rtos. gerrit
• [PATCH]: f86c1decee Ask the RTOS which target to set swbp on. gerrit
• [PATCH]: 45f7337d3a Make `watchpoint.unique_id` a `uint32_t` gerrit
• [PATCH]: c3656a1b1f target/cortex_m: do not expose BASEPRI and FAULTMASK registers gerrit
• Why do some jtag drivers insert a transition to TAP_IR_PAUSE or TAP_DR_PAUSE in *_execute_scan function? Neil Shipp
  • Re: Why do some jtag drivers insert a transition to TAP_IR_PAUSE or TAP_DR_PAUSE in *_execute_scan function? Neil Shipp
  • Re: Why do some jtag drivers insert a transition to TAP_IR_PAUSE or TAP_DR_PAUSE in *_execute_scan function? Paul Fertser
  • Re: Why do some jtag drivers insert a transition to TAP_IR_PAUSE or TAP_DR_PAUSE in *_execute_scan function? Neil Shipp
  • Re: Why do some jtag drivers insert a transition to TAP_IR_PAUSE or TAP_DR_PAUSE in *_execute_scan function? Daniel Glöckner
  • Re: Why do some jtag drivers insert a transition to TAP_IR_PAUSE or TAP_DR_PAUSE in *_execute_scan function? Paul Fertser
• [PATCH]: aa7f9fd53e target: riscv: move the SMP commands under riscv gerrit
• [PATCH]: eb495be6e8 helper/log: mark 'fmt' argument of alloc_*printf() as not NULL gerrit
• [PATCH]: 6de16f0119 target/riscv: implement get_capab() gerrit
• ERROR:EMBEDDED_FILENAME: for changes in configure.ac Agnelo Dcosta (QUIC)
  • Re: ERROR:EMBEDDED_FILENAME: for changes in configure.ac Antonio Borneo
  • Re: ERROR:EMBEDDED_FILENAME: for changes in configure.ac Tommy Murphy
  • Re: ERROR:EMBEDDED_FILENAME: for changes in configure.ac Antonio Borneo
  • Re: ERROR:EMBEDDED_FILENAME: for changes in configure.ac Antonio Borneo
• [PATCH]: fe3f8f3d76 STM32L: Automatically execute an OBL reset after locking or unlocking stm32lx devices gerrit
• [PATCH]: 01b6b95787 target: introduce target capability bits gerrit
• [PATCH]: 2366263ba5 drivers/ft232r: support multichannel FTx232H chips using bitbang mode with arbitrary IO pins gerrit
• [PATCH]: 1d07f3f3e5 tcl/board/ti_*_swd_native.cfg: Add support for direct memory access via SW gerrit
• MCHP eNVM flash driver review - 8570 Liam.Fletcher
• [PATCH]: a796723273 adapter/parport: Drop 'write_on_exit' command gerrit
  • Re: [PATCH]: a796723273 adapter/parport: Drop 'write_on_exit' command karl
• [PATCH]: 2e10729ccc target: cortex-m: fix support for armv8m caches gerrit
• [PATCH]: 312b631b15 adapter/parport: Drop port number support gerrit
• [PATCH]: ef4c97705b tcl: adjust `gdb-attach` handlers to remove BPs and WPs gerrit
• [PATCH]: a8c977585e adapter/cmsis-dap: Add driver for TCP backend gerrit
• [PATCH]: 6301325c77 adapter/parport: Require device file specification gerrit
• [PATCH]: b2f79dc3bc target/cortex_m: force trustzone detection gerrit
• [PATCH]: 1fa033ecb9 target/riscv: fix address translation in hypervisor mode gerrit
• [PATCH]: 9946b78384 configure.ac: add adapter dependency from sys/mman.h gerrit
• [PATCH]: f0416db460 target: riscv: fix double free() in parse_reg_ranges() gerrit
• [PATCH]: e4917e718c configure.ac: rename 'adapterTuple' as 'adapter_driver' gerrit
• [openocd:tickets] #459 Unable to Access openocd.org from Ubuntu 22.04LTS with Firefox Allan Macdonald
  • [openocd:tickets] Re: #459 Unable to Access openocd.org from Ubuntu 22.04LTS with Firefox Paul Fertser
  • [openocd:tickets] #459 Unable to Access openocd.org from Ubuntu 22.04LTS with Firefox Tommy Murphy
• [PATCH]: d40b1a5983 adapter/parport: Add device file support gerrit
• [PATCH]: 0e621d0241 semihosting: Check for overflow in FLEN on 32-bit systems gerrit
• [openocd:tickets] #461 stm32f4x.cfg Requested Speed Too High Antonio Chiu
  • [openocd:tickets] #461 stm32f4x.cfg Requested Speed Too High Antonio Chiu
  • [openocd:tickets] #461 stm32f4x.cfg Requested Speed Too High Tomas Vanek
  • [openocd:tickets] #461 stm32f4x.cfg Requested Speed Too High Tomas Vanek
  • [openocd:tickets] #461 stm32f4x.cfg Requested Speed Too High Antonio Chiu
• [PATCH]: eae61beebb adapters/cmsis-dap: Fix build without libusb gerrit
• [PATCH]: 04da9013f3 Adding WBZ451, WBZ450, PIC32WM_BZ and WBZ351 microchip flash drivers support gerrit
• [PATCH]: a5b21ec611 target/esirisc_trace: rename macro conflicting with bits.h gerrit
• [PATCH]: fcad6ab514 xmc4xxx: Correct some flash sector layouts gerrit
• [PATCH]: db04cb87af target/riscv: return ERROR_TARGET_NOT_HALTED gerrit
• [PATCH]: c776342959 target: riscv: fix memory leak in riscv_openocd_step_impl() gerrit
• Building for windows fails with missing <sys/mman.h> Liviu Ionescu
  • Re: Building for windows fails with missing <sys/mman.h> Liviu Ionescu
• [PATCH]: 4ed9cdfdbc target/riscv: fix get mode filed for vsatp and hgatp gerrit
• [PATCH]: 0739b36d7f flash: nor: Support NOR flash driver for SC-OBC Module A1 gerrit
• [PATCH]: 2ffee023a1 flash: scqspi: Add support for read in SC-QSPI driver gerrit
• [PATCH]: 1137dfae95 flash: scqspi: Add support for verify in SC-QSPI driver gerrit
• [openocd:tickets] #460 Arduino IDE 0xc0000005 Yannick Blendermann
  • [openocd:tickets] #460 Arduino IDE 0xc0000005 Tommy Murphy
• OpenOCD support for debug of non-ARM subsystems accessible via ARM ADI DAP Agnelo Dcosta (QUIC)
  • Re: OpenOCD support for debug of non-ARM subsystems accessible via ARM ADI DAP Antonio Borneo
  • Re: OpenOCD support for debug of non-ARM subsystems accessible via ARM ADI DAP Tomas Vanek
  • Re: OpenOCD support for debug of non-ARM subsystems accessible via ARM ADI DAP Agnelo Dcosta (QUIC)
  • Re: OpenOCD support for debug of non-ARM subsystems accessible via ARM ADI DAP Tony Ferranti OS
  • Re: OpenOCD support for debug of non-ARM subsystems accessible via ARM ADI DAP Antonio Borneo
  • Re: OpenOCD support for debug of non-ARM subsystems accessible via ARM ADI DAP Agnelo Dcosta (QUIC)
  • Re: OpenOCD support for debug of non-ARM subsystems accessible via ARM ADI DAP Antonio Borneo
  • Re: OpenOCD support for debug of non-ARM subsystems accessible via ARM ADI DAP Agnelo Dcosta (QUIC)
• [PATCH]: b06787825a tcl/target/ti_k3.cfg: Add support for direct memory access via SWD gerrit
• [PATCH]: b8914d0f4a adapter/parport: Deprecate direct I/O support gerrit
• [PATCH]: 02ef01f6ff adapter/parport: Drop direct I/O support gerrit
• [PATCH]: c2920df668 tcl/interface: Remove chameleon config gerrit
• [PATCH]: e7cd7498fa tcl/interface: Remove flashlink config gerrit
• [PATCH]: b88c186a31 adapter/parport: Drop 'parport cable' command gerrit
  • Re: [PATCH]: b88c186a31 adapter/parport: Drop 'parport cable' command karl
• [PATCH]: 78e0e1b20d jtag/drivers/cmsis_dap_tcp: fix memory leak gerrit
• [PATCH]: ed9a5df85d target/breakpoints.c: add breakpoint intersection detection gerrit
• [PATCH]: 557a34c8ee target/riscv: improve error messaging in case `sbasize` is zero gerrit
• [PATCH]: df2a7cbb3a tcl/target: add Bouffalo Lab BL616 chip series support gerrit
• [PATCH]: 67ddd8f64a target/riscv: check nextdm address in abits range gerrit
• [PATCH]: 48c26383e3 target: cortex_m: add comment for breakpoint of length 3 gerrit
• [PATCH]: d3a943888b jtag: linuxgpiod: detect available libgpiod version gerrit
• [PATCH]: 3af64dc0bb jtag/drivers/cmsis_dap_tcp: fix socket handling for Windows gerrit
• [PATCH]: efdccd77f3 jtag: linuxgpiod: log memory allocation errors gerrit
• [PATCH]: bf8e8d6701 tcl: add imx943 target and evk board gerrit
• [PATCH]: 834a34edde gdb_server, rtos: Differentiate rtos_get_gdb_reg failing and not implemented gerrit
• [PATCH]: b54c143327 tools/scripts: symbols added to camelcase.txt gerrit
• [PATCH]: b258786c56 rtos: introduce rtos_put_gdb_reg() gerrit
• [openocd:tickets] #458 Config script for target stm32f3x is not correct. Jan Veris
• [PATCH]: 337ee3f5a6 target: support auto-selection of software breakpoint size gerrit
• [PATCH]: 048e5e0367 target/xtensa: fix memory leaks in reg_cache gerrit
• [PATCH]: 3d4eb2baf2 tcl/target/rp2040: fix reset-init rom_api_call invocation gerrit
• [PATCH]: 1fe5ad38d0 doc: riscv: minor fixes in openocd.text gerrit
• [PATCH]: 121f30dc1e target/riscv: fix checking of nuber of parametrs gerrit
• [PATCH]: 37f2d05be4 target: drop halted check from target_add_breakpoint() [RFC] gerrit
• [PATCH]: 0361662116 doc: import document changes relevant to riscv code update gerrit
• [PATCH]: 41703a782b tcl/target: drop more useless reset-start events gerrit
• [PATCH]: bd84210c89 tcl/target/stm32g4x: drop useless reset-start event gerrit
• Adding ability to switch TI Tiva C series MCUs between JTAG and SWD Bryn Hakl
  • Re: Adding ability to switch TI Tiva C series MCUs between JTAG and SWD Bryn Hakl
• [PATCH]: 5f06154c7c target/breakpoints: move and rename ERROR_TARGET_DUPLICATE_BREAKPOINT gerrit
• [PATCH]: eda4c13b62 target/breakpoints: breakpoint_add() rework gerrit
• [PATCH]: bf3164e919 target, flash, doc: Create riscv repeat_read command gerrit
• [PATCH]: 12bb0d61c7 target/riscv: return ERROR_BREAKPOINT_NOT_SET_TRY_NEXT_SMP_CORE gerrit
• [PATCH]: 45c4f4ed50 rtos: Dynamically allocate memory for RTOS registers gerrit
• [PATCH]: 526771fa4e target: extend registers match on 'get_reg' and 'set_reg' gerrit
• [PATCH]: b9043d9a63 README: add instructions for missing INSTALL file gerrit
• [PATCH]: d71ae6b504 tcl/board/digilent_zybo: clarify supported/tested hardware gerrit
• [PATCH]: 52ecc325aa target/breakpoints: resolve SMP + SW breakpoint inconsistencies gerrit
  • RE: [EXTERNAL] [PATCH]: 52ecc325aa target/breakpoints: resolve SMP + SW breakpoint inconsistencies Lupien, John
• [PATCH]: b6bb0661f9 gdb_server: Fix buffer size calculation for snprintf null terminator gerrit
• [PATCH]: 3bfdb4dedd jtag/drivers/cmsis_dap: fix build with cmsis_dap_tcp backend gerrit
• [PATCH]: 18c226ebd6 target/cortex_m: Fix error handling in 'reset_config' gerrit
• [PATCH]: 9c5eeb8aa5 target: add NXP EVK board with reset gerrit
• [PATCH]: baa6a3a1bd add i.mx8ulp target and evk board support gerrit
• [PATCH]: d05c6b61ff tcl/target/rp2040: fix typo in the comment gerrit
• [PATCH]: 2c3f6093f8 configs: Add OpenOCD config for EasyDevKits CH347 JTAG adapter gerrit
• OpenOCD ~HEAD against RP2350 (Pico W) -- getting 'SYSINFO CHIP_ID read failed' Dirk-Willem van Gulik
  • Re: OpenOCD ~HEAD against RP2350 (Pico W) -- getting 'SYSINFO CHIP_ID read failed' Tomas Vanek
  • Re: OpenOCD ~HEAD against RP2350 (Pico W) -- getting 'SYSINFO CHIP_ID read failed' Dirk-Willem van Gulik
  • Re: OpenOCD ~HEAD against RP2350 (Pico W) -- getting 'SYSINFO CHIP_ID read failed' Tomas Vanek
  • Re: OpenOCD ~HEAD against RP2350 (Pico W) -- getting 'SYSINFO CHIP_ID read failed' Dirk-Willem van Gulik
• [PATCH]: ebef2194c2 target/aarch64: Add user command to flush d- and i-caches gerrit
• [PATCH]: 3d3f5955ec doc/manual: Drop LaTeX style guide gerrit
• [PATCH]: 29a3cd1d94 doc/opencocd.texi: mention support of PIC32CZ CA70 gerrit
• Recall: Re: Add WBZ451/WBZ351/WBZ653 flash driver support for OpenOCD Dinesh Arasu - I18360
• [PATCH]: 45409d3797 README.Windows: Remove outdated pkg-config section gerrit

• Earlier messages