On Mon, Dec 3, 2012 at 6:08 PM, Bill Traynor <[email protected]> wrote:
> On Sat, Nov 17, 2012 at 4:35 PM, Andreas Fritiofson <
> [email protected]> wrote:
>
>> Hi!
>>
>> I don't have a Pandaboard and I don't see the problem even if I try to
>> perform similar operations. It may be related to RCLK (which I can't test
>> with) so if you could try switching that off. Please also post a log with
>> --enable-verbose-jtag-io passed to configure. It will be rather big, so
>> it's good that it seems to hang early.
>
>
> Thanks for the tip. I've attached the startup debug log after recompiling
> with --enable-verbose-jtag-io.
>
So, did you test without RCLK? Everything in the log points to some problem
with RCLK. It's entirely possible that the ftdi driver has some problem
with RCLK, since my testing with that has been very limited. On the other
hand RCLK support is just a matter of flipping a switch in the mpsse engine
so there's not much that can go wrong there. If you try with the old ft2232
driver and you still have problems, I'd say you have an issue with your
target, adapter and/or wiring. If, on the other hand, the old driver works,
we'll have to do a bit more debugging.
/Andreas
------------------------------------------------------------------------------
Keep yourself connected to Go Parallel:
BUILD Helping you discover the best ways to construct your parallel projects.
http://goparallel.sourceforge.net
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
