On Mon, Dec 3, 2012 at 4:25 PM, Andreas Fritiofson <
[email protected]> wrote:
>
>
>
> On Mon, Dec 3, 2012 at 6:08 PM, Bill Traynor <[email protected]> wrote:
>
>> On Sat, Nov 17, 2012 at 4:35 PM, Andreas Fritiofson <
>> [email protected]> wrote:
>>
>>> Hi!
>>>
>>> I don't have a Pandaboard and I don't see the problem even if I try to
>>> perform similar operations. It may be related to RCLK (which I can't test
>>> with) so if you could try switching that off. Please also post a log with
>>> --enable-verbose-jtag-io passed to configure. It will be rather big, so
>>> it's good that it seems to hang early.
>>
>>
>> Thanks for the tip. I've attached the startup debug log after
>> recompiling with --enable-verbose-jtag-io.
>>
>
> So, did you test without RCLK? Everything in the log points to some
> problem with RCLK. It's entirely possible that the ftdi driver has some
> problem with RCLK, since my testing with that has been very limited. On the
> other hand RCLK support is just a matter of flipping a switch in the mpsse
> engine so there's not much that can go wrong there. If you try with the old
> ft2232 driver and you still have problems, I'd say you have an issue with
> your target, adapter and/or wiring. If, on the other hand, the old driver
> works, we'll have to do a bit more debugging.
>
> Yes. Working with Peter, we were able to connect to a Beagleboard by
commenting out the adapter_khz is commented out in
board/ti_beagleboard.cfg and target/omap3530.cfg and then explicitly set
low to 10khz. So it would appear something is amiss with rtck and the new
ftdi driver.
I'll continue to test as I have free time.
/Andreas
>
>
------------------------------------------------------------------------------
LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial
Remotely access PCs and mobile devices and provide instant support
Improve your efficiency, and focus on delivering more value-add services
Discover what IT Professionals Know. Rescue delivers
http://p.sf.net/sfu/logmein_12329d2d
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
