On Mon, Jul 8, 2013 at 6:42 PM, Andreas Fritiofson <
[email protected]> wrote:
>
> On Mon, Jul 8, 2013 at 6:56 PM, Laszlo Papp <[email protected]> wrote:
>
>> Alright, the issue seems to be silly. The root cause is the mismatch
>> between the TI and ARM jtag pinouts.
>>
>
> I was just going to reply with what I meant with double-checking
> connections, but I think it's obvious now... :)
>
;-)
> So can we remove the notice from flyswatter.cfg now? Have you verified
> that both SRST and TRST are working?
>
Unfortunately no because I am unable to use flyswatter for my board. I need
to use a TI compatible jtag, and this one is not like that.
Off-topic: I opened a new thread about an issue with the same scenario, but
a different interface jtag. Your help would be appreciated if you have
anything to comment on. :)
Regarding 0xcdb vs 0xcfb it's OK as it is. A_nSRST as output, driven high
> to pull the reset line low, driven low to release it.
>
OK, fair enough.
Many thanks,
Laszlo
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
