Hi, On Sat, Apr 18, 2015 at 09:12:53PM +0200, Giovanni Colosio wrote: > I have a custom board with a LPC1857 processor, that I cannot debug.
Your log suggests me that DBGEN pin is pulled low on your board. You need to let it float or pull high to enable JTAG or SWD debugging. > I am using UBUNTU12LTS running OPENOCD-0.8.0. > I have compiled OPENOCD with SEGGER JLINK support because I had the first > unsuccess with a LPC JLINK2 (with a lpc4357). With the current git version you should be able to use any JLink and it should work in SWD mode too. -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:[email protected] ------------------------------------------------------------------------------ BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT Develop your own process in accordance with the BPMN 2 standard Learn Process modeling best practices with Bonita BPM through live exercises http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
