This is an automated email from Gerrit.
Paul Fertser (fercer...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/2772
-- gerrit
commit f969304c7381339b7fc4ce95eb7600d6332b5827
Author: Paul Fertser <fercer...@gmail.com>
Date: Sat May 16 11:10:31 2015 +0300
manual: add missing usb blaster commands
Change-Id: Ie7fbb9f87a811c4add5b7c8f9581d5bbc90fa4f8
Signed-off-by: Paul Fertser <fercer...@gmail.com>
diff --git a/doc/openocd.texi b/doc/openocd.texi
index 6ce1d28..283026d 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -2685,6 +2685,17 @@ reset_config srst_only
@end example
@end deffn
+@deffn {Command} {usb_blaster_lowlevel_driver}
(@option{ftdi}|@option{ftd2xx}|@option{ublast2})
+Chooses the low level access method for the adapter. If not specified,
+@option{ftdi} is selected unless it wasn't enabled during the
+configure stage. USB-Blaster II needs @option{ublast2}.
+@end deffn
+
+@deffn {Command} {usb_blaster_firmware} @var{path}
+This command specifies @var{path} to access USB-Blaster II firmware
+image. To be used with USB-Blaster II only.
+@end deffn
+
@end deffn
@deffn {Interface Driver} {gw16012}
--
------------------------------------------------------------------------------
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
