Hey, On Tue, Jun 02, 2015 at 07:17:45PM +0000, Daniel Siladji wrote: > I have attached my log and config files. My setup looks like this: > Raspberry Pi is connected to the laptop via USB and LAN. > P1 (3.3V) of the Pi is connected to the 3V3 pin on the [1]yunjia > P20 (GND) of the Pi is connected to the GND pin on the nrf51 > P16 (GPIO23) <--> SCLKÂ
SWCLK > P18 (GPIO24) <--> SDO SWDIO > I have checked, and the nrf51 is powered on, eg it is visible in a bluetooth > scan. I am guessing that I have not connected something correctly, but I have > no > idea what. Everything looks ok to me, can't find anything obviously wrong... You should try checking once again all the pinouts, make sure they match your hardware etc. I've just got a report of RPi2 working in SWD mode nicely with sysfsgpio driver. HTH -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:[email protected] ------------------------------------------------------------------------------ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
