Hi PEdro, Answering on the list, as the ticketing system is not suitabe as a help and discussion system.
Le Fri, 21 Aug 2015 12:51:27 +0000, "PEdro" <[email protected]> a écrit : > > > > --- > > ** [tickets:#105] openocd.cfg confusion** > > **Status:** new > **Milestone:** 0.9.0 > **Created:** Fri Aug 21, 2015 12:51 PM UTC by PEdro > **Last Updated:** Fri Aug 21, 2015 12:51 PM UTC > **Owner:** nobody > > > Hi everyone , i am really sorry to post this here , but it looks that in > forum of openocd i have to wait from administration approoval . > This is the first time i am using openocd , and i know that i need to > configure an openocd.cfg file to avoid this message : > > Open On-Chip Debugger 0.10.0-dev-00022-g2dcf7bf-dirty (2015-08-15-20:27) > Licensed under GNU GPL v2 > For bug reports, read > http://openocd.org/doc/doxygen/bugs.html > embedded:startup.tcl:60: Error: Can't find openocd.cfg > in procedure 'script' > at file "embedded:startup.tcl", line 60 > Error: Debug Adapter has to be specified, see "interface" command > embedded:startup.tcl:60: Error: > in procedure 'script' > at file "embedded:startup.tcl", line 60 More precisely, you need to create such a file if OpenOCD does not provide one already for your board in its scripts/boards directory. > But i didnt not found yet on the net or even on openocd help , where is the > place i should put that file!!!! Anywhere you like, since you have to tell openocd where the file is anyway. > I tryed on the root of the program , on the src folder , and still have this > error . > I am on linux and i am using an : > Bus 003 Device 002: ID 0403:6010 Future Technology Devices International, Ltd > FT2232C Dual USB-UART/FIFO IC (This does not say much, as it is the description of a generic chip from FTDI which is used in a lot of JTAG probes.) > Could some gentle soul here give me an help on this ? > There is much lack of configuration setup information on the help about this > issue . Try running "openocd --help" and "man openocd". > And if we go on the net , then we will find websites pointing configurations > to old drivers that are not already in openocd . Try the documentation on the OpenOCD site: http://openocd.org/doc-release/html/index.html And especially this section: http://openocd.org/doc-release/html/Config-File-Guidelines.html#Config-File-Guidelines > As last resort , i try this site to try to fix this issue , but as always , > they did not explain where to put that config file . > http://www.fun-tech.se/stm32/OpenOCD/index.php > > Again , sorry for posting this here , i know that for some of you should be > a piece of cake , but for me is a dead end . > > Thank you for your understanding . No problem. :) Amicalement, -- Albert. ------------------------------------------------------------------------------ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
