D:\TDMI\TDMIWORK\LMG\OLIMEX\Efforts\OpenOCD-OLIMEX-WINDOWS\openocd-0.9.0-dev\bin-x64>openocd-x64-0.9.0-dev.exe
-f olimex-arm-usb-ocd-h.cfg -f lpc2148.cfg -c "program L
250_v1000_Bootloader_Relay.bin 0x00"
Open On-Chip Debugger 0.9.0-dev-00186-g30203b3 (2014-11-13-22:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
init_targets
Warning - assuming default core clock 12MHz! Flashing may fail if actual core
clock is different.
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain
connect_deassert_srst
adapter_nsrst_delay: 100
jtag_ntrst_delay: 100
adapter speed: 1500 kHz
Warn : Using DEPRECATED interface driver 'ft2232'
Info : Consider using the 'ftdi' interface driver, with configuration files in
interface/ftdi/...
Info : max TCK change to: 30000 kHz
Info : clock speed 1500 kHz
Info : JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (mfg: 0x787, part:
0xf1f0, ver: 0x4)
Info : Embedded ICE version 4
Info : lpc2148.cpu: hardware has 2 breakpoint/watchpoint units
Info : JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (mfg: 0x787, part:
0xf1f0, ver: 0x4)
Error: timed out while waiting for target halted
TARGET: lpc2148.cpu - Not halted
in procedure 'program'
in procedure 'reset' called at file "embedded:startup.tcl", line 466
in procedure 'ocd_bouncer'
** Unable to reset target **
shutdown command invoked
---
** [tickets:#111] LPC2138**
**Status:** new
**Milestone:** 0.9.0
**Created:** Tue Nov 03, 2015 02:21 AM UTC by Kenneth Deitz
**Last Updated:** Tue Nov 03, 2015 07:48 AM UTC
**Owner:** nobody
I have tried everything with OPENOCD nothing works as per the documentation.
Errors, deprecations, invalid commands, sub commands, too few arguments in the
FLASH write_image command, yet I look at the docs and everything seems okay. I
modified the structure for my OLIMEX-ARM-USB-OCD-H shown here:
http://siwawi.bauing.uni-kl.de/avr_projects/arm_projects/openocd_intro/
Nothing works. I simply want to use the programmer unit to load SREC data into
a LPC2138. Nothing more. Why is this so difficult? Anyone got code that will
work?
---
Sent from sourceforge.net because [email protected] is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
------------------------------------------------------------------------------
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
