Argh: Openocd1 is log with the right number fo breakpoint. Attached "openocd"
here is log with wrong number seen. At line 278 you can see that a M0 is
detected :-(
Attachments:
-
[openocd](https://sourceforge.net/p/openocd/tickets/_discuss/thread/bbb4eddb/c1e9/attachment/openocd)
(27.9 kB; application/octet-stream)
---
** [tickets:#126] STM32F7/Stlink: Initial openocd start deosn't find
breakpoints**
**Status:** new
**Milestone:** 0.9.0
**Created:** Tue Apr 12, 2016 09:36 AM UTC by Uwe Bonnes
**Last Updated:** Tue Apr 12, 2016 09:36 AM UTC
**Owner:** nobody
**Attachments:**
- [openocd1](https://sourceforge.net/p/openocd/tickets/126/attachment/openocd1)
(30.0 kB; application/octet-stream)
Hello,
this happens with F7-Disco and Nucleo-F7.
When board is just powered up by plugging in the Stlink, initial connect to the
board does not see the right number of breakpoints:
t520 > src/openocd -s tcl -f tcl/board/stm32f7discovery.cfg
...
> Info : stm32f7x.cpu: hardware has 0 breakpoints, 10 watchpoints
Only by keeping the reset button of the board pressed while openocd is started
make openocd see the right number.
Find attached "openocd1" as a -d3 log when the wrong number of breakpoints is
seen.
---
Sent from sourceforge.net because [email protected] is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
------------------------------------------------------------------------------
Find and fix application performance issues faster with Applications Manager
Applications Manager provides deep performance insights into multiple tiers of
your business applications. It resolves application problems quickly and
reduces your MTTR. Get your free trial!
https://ad.doubleclick.net/ddm/clk/302982198;130105516;z
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
