- **status**: new --> closed
- **Comment**:
closed due to no recent activity - please reopen if this is still an issue.
---
** [tickets:#126] STM32F7/Stlink: Initial openocd start deosn't find
breakpoints**
**Status:** closed
**Milestone:** 0.9.0
**Created:** Tue Apr 12, 2016 09:36 AM UTC by Uwe Bonnes
**Last Updated:** Tue Apr 12, 2016 10:05 AM UTC
**Owner:** nobody
**Attachments:**
- [openocd1](https://sourceforge.net/p/openocd/tickets/126/attachment/openocd1)
(30.0 kB; application/octet-stream)
Hello,
this happens with F7-Disco and Nucleo-F7.
When board is just powered up by plugging in the Stlink, initial connect to the
board does not see the right number of breakpoints:
t520 > src/openocd -s tcl -f tcl/board/stm32f7discovery.cfg
...
> Info : stm32f7x.cpu: hardware has 0 breakpoints, 10 watchpoints
Only by keeping the reset button of the board pressed while openocd is started
make openocd see the right number.
Find attached "openocd1" as a -d3 log when the wrong number of breakpoints is
seen.
---
Sent from sourceforge.net because [email protected] is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
