On Dienstag, 6. März 2018 15:00:05 CET Shane R wrote: > I have a snickerdoodle board <http://krtkl.com/> and I'm interested in > integrating OpenOCD with custom IP that I can create in the FPGA. The > question that I have is what are the requirements for implementing the > VHDL...what does OpenOCD expect the hardware side to implement? > > I'm aware that the ZY1000 has done something similar and I was just > wondering if there exists documentation that explains the hardware > requirements. If OpenOCD treats my hardware as a black box, then what are > the inputs to the hardware (VHDL) and what are the expected outputs from > the hardware (VHDL) back to OpenOCD?
What are you actually trying to do? A JTAG probe? Then have a look at the HLA adapter drivers like stlink, or the CMSIS-DAP driver. BR, Matthias > > Shane ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel