Hi Daniel,
The patch of Eric Hoffmann sounds promising, but it doesn't work with my
board (which has an on-board USB-Blaster2 solution).
After making `ublast_in_buf_read_thread` more tolerant, the
initialization worked.
Just when using GDB, a lot of errors occur. I have to dig deeper into
the changes to understand, why this happens.
Best Regards,
Christian
On 03/26/2018 10:26 PM, Daniel Glöckner wrote:
Hi,
On Mon, Mar 26, 2018 at 10:06:12PM +0200, Christian Haettich wrote:
Is there a way to improve this?
There was a patch by Eric Hoffman that speeds up the communication
with the USB Blaster: http://openocd.zylin.com/4218
And I posted a patch that removes an unnecessary detour done by the
USB Blaster driver in the JTAG state machine:
http://openocd.zylin.com/4245
Best regards,
Daniel
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
