This is an automated email from Gerrit.
"zapb <d...@zapb.de>" just uploaded a new patch set to Gerrit, which you can
find at https://review.openocd.org/c/openocd/+/8015
-- gerrit
commit 5e91355b5a7d831a3ddf5614f2b209b56aadd628
Author: Marc Schink <d...@zapb.de>
Date: Sat May 13 12:37:12 2023 +0200
tcl/target: Add Geehy APM32F0x config
Tested with APM32F030C8T using SWD transport. All flash operations,
including sector and device protection, work as expected.
Revision identifier (0x0011) is not updated due to missing documentation.
Introduce a new directory structure that contains the manufacturer for
the sake of clarity.
Change-Id: I679387943b09fef640f8f8b6904e542f4e4b29aa
Signed-off-by: Marc Schink <d...@zapb.de>
diff --git a/tcl/target/geehy/apm32f0x.cfg b/tcl/target/geehy/apm32f0x.cfg
new file mode 100644
index 0000000000..502c092751
--- /dev/null
+++ b/tcl/target/geehy/apm32f0x.cfg
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+#
+# Geehy APM32F0x target
+#
+# https://global.geehy.com/MCU
+#
+
+#
+# APM32F0x devices support SWD transport only.
+#
+source [find target/swj-dp.tcl]
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME apm32f0x
+}
+
+# Work-area is a space in RAM used for flash programming, by default use 1 KiB.
+if { [info exists WORKAREASIZE] } {
+ set _WORKAREASIZE $WORKAREASIZE
+} else {
+ set _WORKAREASIZE 0x400
+}
+
+if { [info exists CPUTAPID] } {
+ set _CPUTAPID $CPUTAPID
+} else {
+ set _CPUTAPID 0x0bc11477
+}
+
+swj_newdap $_CHIPNAME cpu -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -endian little -dap $_CHIPNAME.dap
+
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size
$_WORKAREASIZE -work-area-backup 0
+
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME stm32f1x 0x08000000 0 0 0 $_TARGETNAME
+
+adapter speed 1000
+
+if {![using_hla]} {
+ # if srst is not fitted use SYSRESETREQ to perform a soft reset.
+ cortex_m reset_config sysresetreq
+}
--
