Hello Øyvind The "status" is best described here: http://groups.google.com/group/beagleboard/msg/ef58b43682dee5cb
My current approach it to TRY to make it possible to add items to the scan chain using "simple" openocd command. (make the jtag_device command work at later stage). but I am not making much progress ATM. greetings On Mon, Oct 13, 2008 at 10:31 PM, Øyvind Harboe <[EMAIL PROTECTED]> wrote: >> Some developers are working on OpenOCD support for Beagle/OMAP35xx >> using Flyswatter. As far as I know, the main issue is that OpenOCD >> doesn't support the "new" JTAG architecture of OMAP35xx at the moment. >> I.e. you first have to add DAP to the TAP router, via a programming >> sequence, then ARM core can be accessed. > > Can you post some details on this to this mailing list? > > The last time this was discussed in openocd development mailing list > there was various other issues that had to be addressed that got > in the way... (reset as I recall)... but that should be sorted now. > > -- > Øyvind Harboe > http://www.zylin.com/zy1000.html > ARM7 ARM9 XScale Cortex > JTAG debugger and flash programmer > > Free eCos workshop in Oslo October 21! > http://www.zylin.com/workshop.html > _______________________________________________ > Openocd-development mailing list > Openocd-development@lists.berlios.de > https://lists.berlios.de/mailman/listinfo/openocd-development > _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
