Doh! Working now. I had the beagle board adapter plugged into the beagle instead of the flyswatter.
On Tue, Dec 1, 2009 at 1:49 PM, John Rigby <jcri...@gmail.com> wrote: > I already tried that: > > $ telnet localhost 4444 > Trying ::1... > Trying 127.0.0.1... > Connected to localhost. > Escape character is '^]'. > Open On-Chip Debugger >> reset halt > RCLK not supported - fallback to 1000 kHz > JTAG scan chain interrogation failed: all ones > Check JTAG interface, timings, target power, etc. > error: -100 > Command handler execution failed > in procedure 'reset' called at file "command.c", line 637 > called at file "command.c", line 352 >> > > Its like I've got the jtag connector connected wrong. I'm using the > beagle board adapter that I got from tincantools. And I have all the > pin 1s matched up. > > On Tue, Dec 1, 2009 at 1:41 PM, David Brownell <davi...@pacbell.net> wrote: >> On Tuesday 01 December 2009, John Rigby wrote: >>> I'm trying to use OpenOCD with a Flyswatter and a beagleboard and I get >>> this: >>> >>> # openocd -f ./tcl/interface/flyswatter.cfg -f >>> ./tcl/board/ti_beagleboard.cfg >>> Open On-Chip Debugger 0.4.0-dev-00740-ga65e75e (2009-12-01-12:05) >>> For bug reports, read >>> http://openocd.berlios.de/doc/doxygen/bugs.html >>> RCLK - adaptive >>> Warn : omap3530.dsp: huge IR length 38 >>> RCLK - adaptive >>> trst_only separate trst_push_pull >>> Info : RCLK (adaptive clock speed) not supported - fallback to 1000 kHz >>> Error: JTAG scan chain interrogation failed: all ones >>> Error: Check JTAG interface, timings, target power, etc. >>> Error: JTAG scan chain interrogation failed: all ones >>> Error: Check JTAG interface, timings, target power, etc. >>> >>> Any ideas? >> >> "reset halt" should make things work OK. >> >> I don't know what causes that startup glitch, but things seem to >> behave OK after an explicit reset. >> >> >> > _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
