Hello all.
I'm trying to modify the NAND-flash driver for iMX31 for support iMX35.
I start openocd, and get the log:
---
[imp...@kb33 openocd]$ src/openocd -f /home/impatt/openocd.cfg
Open On-Chip Debugger 0.4.0-rc1-dev-00118-gdab9297-dirty (2010-01-20-10:20)
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain
Warn : imx35.whatchacallit: nonstandard IR value
Warn : imx35.whatchacallit: nonstandard IR mask
Error: Target not examined yet
Info : clock speed 500 kHz
Info : JTAG tap: imx35.etb tap/device found: 0x2b900f0f (mfg: 0x787, part:
0xb900, ver: 0x2)
Info : JTAG tap: imx35.cpu tap/device found: 0x07b3601d (mfg: 0x00e, part:
0x7b36, ver: 0x0)
Info : TAP imx35.whatchacallit does not have IDCODE
Info : JTAG tap: imx35.sdma tap/device found: 0x0882601d (mfg: 0x00e, part:
0x8826, ver: 0x0)
Info : found ARM1136
Info : imx35.cpu: hardware has 6 breakpoints, 2 watchpoints
Warn : ETMv2+ support is incomplete
Info : ETM v3.1
---
When I try to invoke target_read_u32(), I get a message in the log: Error: 131
6 target.c: 1477 target_read_u32(): Target not examined yet
Can anyone suggest how to try to get rid of the error?
Thank you.
--
Regards,
Alexei Babich, circuit design engineer, Rezonans plc., Chelyabinsk, Russia
http://www.rez.ru
Jabber ID: imp...@jabber.ru
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
